IDES Prospector Already have an account? Login Here

IDES

MAGNUM™ 375 HH

ABS Resin

Supplied by Styron LLC

The technical datasheet with complete property values for MAGNUM™ 375 HH is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High Heat, Low Gloss, Medium Impact ABS resin for injection molding

Applications:
  • Automotive interior trim applications requiring low volatile organic compounds (VOC).
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
 
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
     
--
 
ASTM D792
--
g/cm³
ISO 1183/B
Melt Mass-Flow Rate (MFR) (230°C/3.8 kg)
g/10 min
ASTM D1238
Molding Shrinkage
    ASTM D955
Flow
in/in
 
Across Flow
in/in
 
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
     
-- 2
psi
ASTM D638
--
psi
ISO 527-2/50
Tensile Strength
     
Yield 2
psi
ASTM D638
Yield
psi
ISO 527-2/50
Tensile Elongation
     
Yield 2
%
ASTM D638
Yield
%
ISO 527-2/50
Break 2
%
ASTM D638
Break
%
ISO 527-2/50
Flexural Modulus
     
-- 3
psi
ASTM D790
-- 4, 5
psi
ISO 178
Flexural Strength
     
-- 3
psi
ASTM D790
-- 4, 5
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Notched Izod Impact
     
-22°F
ft·lb/in
ASTM D256
73°F
ft·lb/in
ASTM D256
-22°F
ft·lb/in²
ISO 180/A
73°F
ft·lb/in²
ISO 180/A
Instrumented Dart Impact
    ASTM D3763
-22°F, Peak Energy
in·lb
 
73°F, Peak Energy
in·lb
 
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     
66 psi, Unannealed
°F
ASTM D648
66 psi, Unannealed
°F
ISO 75-2/B
264 psi, Unannealed
°F
ASTM D648
264 psi, Unannealed
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50, ASTM D1525 6
CLTE
    ASTM E831
Flow: -40 to 212°F
in/in/°F
 
Transverse: -40 to 212°F
in/in/°F
 
Flammability
Nominal Value
Unit
Test Method
FMVSS Flammability 7
in/min
FMVSS 302
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: MAGNUM™ 375 HH, MAGNUM 375 HH, MAGNUM™ , MAGNUM, MAGNUM375HH, 375 HH, 375HH, Acrylonitrile Butadiene Styrene, ABS, Styron, AcrylonitrileButadieneStyrene, HH375
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
3Method I (3 point load), 0.079 in/min
40.079 in/min
53-points
6Rate A (50°C/h), Loading 2 (50 N)
7This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.