IDES Prospector Already have an account? Login Here

IDES

Tarflon® A2600

Polycarbonate

Supplied by Idemitsu Chemicals

The technical datasheet with complete property values for Tarflon® A2600 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • High Viscosity
Uses 
  • Corrugated Sheet
  • Sheet
  
Appearance 
  • Natural Color
Processing Method 
  • Injection Molding
Resin ID (ISO 1043)
  • >PC<
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR)
in³/10min
 ISO 1133
Molding Shrinkage
     Internal Method
Across Flow
%
  
Flow: 0.0787 in
%
  
Water Absorption 2 (Equilibrium, 73°F, 50% RH)
%
 ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress (Yield)
psi
 ISO 527-2
Nominal Tensile Strain at Break
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness
     ISO 2039-2
M-Scale
 
  
R-Scale
 
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
CLTE - Flow
in/in/°F
 ISO 11359-2
Electrical
Nominal Value
Unit
Test Method
Dielectric Constant (1 MHz)
 
 IEC 60250
Arc Resistance
sec
 ASTM D495
Electric Strength
V/mil
 IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
UL File Number
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Tarflon® A2600, Tarflon A2600, Tarflon® , Tarflon, TarflonA2600, A 2600, A2600, Polycarbonate, PC, Idemitsu, 2600A
Features
Features may also be described by the following terms: High Viscosity.
Uses
Uses may also be described by the following terms: Corrugated Sheet.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
224 hrs
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.