Ultramid® B 3EG7 BASF Polyamide 6 (Glass Fiber Reinforcement, 35%)

Product Description

Ultramid B3EG7 is a 35% glass fiber reinforced injection molding PA6 grade.

Typical applications include industrial articles and electrical insulating parts.

General

Material Status

Commercial: Active

Availability

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 35% Filler by Weight

Additive

Heat Stabilizer

Features

Good Stiffness

Good Thermal Aging Resistance

Heat Stabilized

Uses

Electrical Parts

Industrial Applications

Insulation

RoHS Compliance

Appearance

Natural Color

Forms

Pellets

Processing Method

Injection Molding

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (275°C/2.16 kg)		--	in³/10min	ISO 1133
Water Absorption				ISO 62
Saturation, 73°F		--	%
Equilibrium, 73°F, 50% RH		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus (73°F)			psi	ISO 527-2
Tensile Stress (Break, 73°F)			psi	ISO 527-2
Tensile Strain (Break, 73°F)			%	ISO 527-2
Flexural Modulus (73°F)		--	psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength				ISO 179
-22°F		--	ft·lb/in²
73°F			ft·lb/in²
Charpy Unnotched Impact Strength				ISO 179
-22°F		--	ft·lb/in²
73°F			ft·lb/in²
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		--	°F	ISO 75-2/B
264 psi, Unannealed		--	°F	ISO 75-2/A
Melting Temperature (DSC)		--	°F	ISO 3146
CLTE				ISO 11359-2
Flow		--	in/in/°F
Transverse		--	in/in/°F
Electrical	Dry	Conditioned	Unit	Test Method
Volume Resistivity
--		--	ohm·cm	IEC 60093
--	--		ohm·in	IEC 60093²
Dielectric Constant
1 MHz		--		IEC 60250
1 MHz	--			IEC 60250²
Dissipation Factor
100 Hz		--		IEC 60250
1 MHz		--		IEC 60250
100 Hz	--			IEC 60250²
1 MHz	--			IEC 60250²
Comparative Tracking Index
--		--	V	IEC 60112
--	--			IEC 60112²
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL (0.0591 in)		--		UL 94
UL	Dry	Conditioned	Unit	Test Method
RTI Str (0.0591 in)		--	°F	UL 746
RTI Imp (0.0591 in)		--	°F	UL 746
RTI Elec (0.0591 in)		--	°F	UL 746
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 3EG7, Ultramid B 3EG7, Ultramid® B , Ultramid B, UltramidB3EG7, UltramidB, B 3 EG 7, B3EG7, B3, 3 EG 7, 3EG7, 3EG, EG7, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, EG3, 3B
Generic Name
Dry	Generic Name may also be described by the following terms: PA6.
Conditioned	Generic Name may also be described by the following terms: PA6.
Features
Dry	Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Stiffness, Good Thermal Aging Resistance, Thermal Aging Resistant.
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® B 3EG7, Ultramid B 3EG7, Ultramid® B , Ultramid B, UltramidB3EG7, UltramidB, B 3 EG 7, B3EG7, B3, 3 EG 7, 3EG7, 3EG, EG7, Polyamide 6, Nylon 6, Polyamide, Nylon, pa6, BASF, Polyamide6, Nylon6, EG3, 3B

Injection	Dry	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate

Notes

¹Typical properties: these are not to be construed as specifications.

²Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.

Ultramid® B 3EG7

Polyamide 6

Glass Fiber Reinforcement, 35%

Supplied by BASF Corporation