IDES Prospector Already have an account? Login Here

IDES

Ultramid® A 34 01

Polyamide 66

Supplied by BASF Corporation

The technical datasheet with complete property values for Ultramid® A 34 01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Ultramid A34 01 is an intermediate viscosity, PA66 grade. It conforms to FDA requirements including, 21 CFR 177.1500,EU Directive 2002/72/EC, the German BfR recommendation "X Polyamide", 1.6.1998 or legislations for other countries will be provided on request.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Medium Viscosity
  • Oil Resistant
  
Uses 
  • Film
  • Monofilaments
  
Agency Ratings 
RoHS Compliance 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Film Extrusion
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
  • Secant Modulus vs. Strain (ISO 11403-1)
  • Viscosity vs. Shear Rate (ISO 11403-2)
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183, ASTM D1505
Apparent Density
g/cm³
 ISO 60
Water Absorption
      
Saturation
%
 ASTM D570, ISO 62 2
Equilibrium, 50% RH
%
 ASTM D570
Equilibrium
%
 ISO 62 2
Viscosity Number (96% H2SO4 (Sulphuric Acid))
cm³/g
 ISO 307
Moisture Content
%
 ISO 15512
Mechanical
Nominal Value
Unit
Test Method
Tensile modulus
psi
 ISO 527-2 2
Tensile Stress (Yield)
psi
 ISO 527-2 2
Tensile Strain (Yield)
%
 ISO 527-2 2
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi)
°F
 ISO 75-2 2
Peak Melting Temperature
      
--
°F
 ASTM D3418
--
°F
 ISO 3146
Additional Information
Nominal Value
Unit
Test Method
Pellet Shape
 
  
Pellet Size
mil
  
Relative Viscosity - 1% in 96% Sulfuric Acid
 
 ISO 307
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Ultramid® A 34 01, Ultramid A 34 01, Ultramid® A , Ultramid A, UltramidA3401, UltramidA, A 34 01, A34 01, A34, A3401, 34 01, 3401, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, BASF, Polyamide66, Nylon66, 0134, 34A
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Medium Viscosity.
Uses
Uses may also be described by the following terms: Monofilaments, Monofilament.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Notes
1Typical properties: these are not to be construed as specifications.
2Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.