IDES Prospector Already have an account? Login Here

IDES

Hostaform® C 9021 10/9005

Acetal (POM) Copolymer

Supplied by Ticona

The technical datasheet with complete property values for Hostaform® C 9021 10/9005 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hostaform® C 9021 10/9005 is a nominal 9 melt flow rate acetal copolymer which is capable of being permanently marked by a laser. Parts molded from Hostaform® C 9021 10/9005 can be laser marked with barcodes, identification numbers, designs, 2-D symbology, etc.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
 
Features 
  • Laser Markable
RoHS Compliance 
Processing Method 
  • Injection Molding
  • Profile Extrusion
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
ISO 1133
Molding Shrinkage
    ISO 294-4
Across Flow
%
 
Flow
%
 
Water Absorption (Saturation, 73°F)
%
ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2/1A/1
Tensile Stress (Yield)
psi
ISO 527-2/1A/50
Tensile Strain (Yield)
%
ISO 527-2/1A/50
Nominal Tensile Strain at Break
%
ISO 527-2/1A/50
Tensile Creep Modulus
    ISO 899-1
1 hr
psi
 
1000 hr
psi
 
Flexural Modulus (73°F)
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
    ISO 179/1eA
-22°F
ft·lb/in²
 
73°F
ft·lb/in²
 
Charpy Unnotched Impact Strength
    ISO 179/1eU
-22°F
ft·lb/in²
 
73°F, Partial Break
ft·lb/in²
 
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Melting Temperature 2
°F
ISO 11357-3
CLTE
    ISO 11359-2
Flow
in/in/°F
 
Transverse
in/in/°F
 
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
IEC 60093
Volume Resistivity
ohm·cm
IEC 60093
Relative Permittivity
    IEC 60250
100 Hz
 
 
1 MHz
 
 
Dissipation Factor
    IEC 60250
100 Hz
 
 
1 MHz
 
 
Comparative Tracking Index
V
IEC 60112
Electric Strength
V/mil
IEC 60243-1
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
    UL 94
0.0591 in
 
 
0.118 in
 
 
Fill Analysis
Nominal Value
Unit
Test Method
Melt Density
g/cm³
Internal Method
Melt Specific Heat
Btu/lb/°F
ASTM C351
Melt Thermal Conductivity
Btu·in/hr/ft²/°F
Internal Method
Ejection Temperature
°F
 
Additional Information
Nominal Value
Unit
Test Method
Effective Thermal Diffusivity
cSt
Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostaform® C 9021 10/9005, Hostaform C 9021 109005, Hostaform® , Hostaform, HostaformC9021109005, C 9021 10, C902110, C 9021 10/9005, C 9021 109005, C 9021 10:9005, C 9021 10+9005, C 9021 10-9005, C 9021 10_9005, C 9021 10 9005, C9021, 902110, 109005, C9021109005, Acetal Copolymer, Acetal Copolymer, C902110_9005, Acetal (POM) Copolymer, Acetal POM Copolymer, Acetal, pom, Ticona, AcetalPOMCopolymer, 9021C
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Screw L/D Ratio
 
 
Injection Notes
Standard injection moulding machines with three phase (15 to 25 D)
plasticating screws will fit.
Notes
1Typical properties: these are not to be construed as specifications.
210°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.