IDES Prospector Already have an account? Login Here

IDES

TATREN® IM 25 75

Polypropylene Impact Copolymer

Supplied by Slovnaft Petrochemicals, s.r.o.

The technical datasheet with complete property values for TATREN® IM 25 75 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
TATREN IM 25 75 is controlled rheology impact copolymer of good fluidity, excellent impact resistance at room temperature, very good impact resistance at minus temperatures and improved stiffness. This grade contains nucleating and antistatic agent.

TATREN IM 25 75 is intended especially for injection moulding of heavy-duty products where very high impact resistance at room temperature combined with good stiffness is required. Typical end products are storage and transport containers, medical containers, crates and rigid boxes, luggage, pails, car parts and other technical and heavy-duty applications. TATREN IM 25 75 is suitable for compounds intended for automotive industry as well as for other industrial sectors. The grade meets requirements for toys production.

TATREN IM 25 75 is suitable for food contact. The product complies with Food Contact Regulations.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antistatic
  • Nucleating Agent
  
Features 
  • Antistatic
  • Food Contact Acceptable
  • Good Flow
  • Good Stiffness
  • Impact Copolymer
  • Low Temperature Impact Resistance
  • Nucleated
  • Ultra High Impact Resistance
Uses 
  • Industrial Applications
  • Luggage
  • Medical/Healthcare Applications
  • Pails
  • Toys
  • Valves/Valve Parts
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Injection Molded)
psi
 ISO 527-2
Tensile Stress (Yield, Injection Molded)
psi
 ISO 527-2
Tensile Strain (Yield, Injection Molded)
%
 ISO 527-2
Flexural Modulus (Injection Molded)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/A
-4°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ISO 2039-2
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TATREN® IM 25 75, TATREN IM 25 75, TATREN® , TATREN, TATRENIM2575, IM 25 75, IM25, 2575, IM2575, Polypropylene Impact Copolymer, PP Impact Copolymer, Polypropylene, PP, Slovnaft, PolypropyleneImpactCopolymer, PPImpactCopolymer, 25IM
Features
Features may also be described by the following terms: Impact Copolymer, Good Flow, Ultra High Impact Resistance, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Stiffness.
Uses
Uses may also be described by the following terms: Valves, Valve Parts, Medical Applications.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.