Reny® 1022HS Mitsubishi EP Polyarylamide (Glass Fiber Reinforcement, 50%)

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 50% Filler by Weight

Physical	Dry	Conditioned	Unit	Test Method
Density		--	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (275°C/2.16 kg)		--	g/10 min	ISO 1133
Melt Volume-Flow Rate (MVR) (275°C/2.16 kg)		--	in³/10min	ISO 1133
Molding Shrinkage		--	%
Water Absorption				ISO 62
Saturation, 73°F		--	%
Equilibrium, 73°F, 50% RH		--	%
Mechanical	Dry	Conditioned	Unit	Test Method
Tensile Modulus			psi	ISO 527-2
Tensile Stress (Break)			psi	ISO 527-2
Tensile Strain (Break)			%	ISO 527-2
Flexural Modulus			psi	ISO 178
Flexural Strength			psi	ISO 178
Impact	Dry	Conditioned	Unit	Test Method
Charpy Notched Impact Strength (73°F)			ft·lb/in²	ISO 179
Charpy Unnotched Impact Strength (73°F)			ft·lb/in²	ISO 179
Thermal	Dry	Conditioned	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		--	°F	ISO 75-2/A
CLTE				ISO 11359-2
Flow		--	in/in/°F
Transverse		--	in/in/°F
Electrical	Dry	Conditioned	Unit	Test Method
Surface Resistivity		--	ohm	IEC 60093
Volume Resistivity		--	ohm·cm	IEC 60093
Relative Permittivity (1 MHz)		--		IEC 60250
Dissipation Factor (1 MHz)		--		IEC 60250
Electric Strength				IEC 60243-1
0.0394 in		--	V/mil
0.0787 in		--	V/mil
Flammability	Dry	Conditioned	Unit	Test Method
Flame Rating - UL		--		UL 94
Related Terminology
Dry	Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® 1022HS, Reny 1022HS, Reny® , Reny, Reny1022HS, 1022 HS, 1022HS, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP, HS1022
Conditioned	Product names can be difficult to match. You may have searched any one of these terms to find this product: Reny® 1022HS, Reny 1022HS, Reny® , Reny, Reny1022HS, 1022 HS, 1022HS, Polyarylamide, PARA, Polyamide, Nylon, Mitsubishi EP, HS1022

Injection	Dry	Unit
Drying Temperature
A		°F
B		°F
Drying Time
A		hr
B		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Mold Temperature		°F
Injection Pressure		psi
Injection Rate
Screw Speed		rpm

Notes

¹Typical properties: these are not to be construed as specifications.

Reny® 1022HS

Polyarylamide

Glass Fiber Reinforcement, 50%

Supplied by Mitsubishi Engineering-Plastics Corp