IDES Prospector Already have an account? Login Here

IDES

Hostalen ACP 5331H UV B Plus

High Density Polyethylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Hostalen ACP 5331H UV B Plus is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hostalen ACP 5331H UV B Plus is a HDPE resin produced using LyondellBasell latest-generation Hostalen ACP technology. Hostalen ACP 5331H UV B Plus exhibits good processing characteristics on a wide range of injection molding and compression molding equipment.

Exceptional organoleptic properties and a good balance of stiffness, toughness and environmental stress cracking resistance makes Hostalen ACP 5331H UV B Plus the choice of customers for the production of closures for sparkling water, CSD and many other types of food and non-food caps and closures.

Hostalen ACP 5331H UV B Plus is formulated with an additive package for an optimised combination of organoleptic properties and opening torque.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Additive 
  • Slip
Features 
  • Good Organoleptic Properties
  • Good Processability
  • Good Stiffness
  • Good Toughness
  • High ESCR (Stress Crack Resist.)
  • Slip
Uses 
  • Caps
  • Closures
  • Non-specific Food Applications
Processing Method 
  • Compression Molding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
FNCT 2 (122°F)
hr
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (-22°F)
ft·lb/in²
 ISO 179
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Ball Indentation Hardness (H 132/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Hostalen ACP 5331H UV B Plus, Hostalen , HostalenACP5331HUVBPlus, ACP 5331 H UV B Plus, ACP 5331H UV B Plus, ACP5331, 5331H, HUV, UVB, BPlus, ACP5331HUVBPlus, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, LyondellBasell, PolyethyleneHighDensity, 5331ACP
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Organoleptic Properties, Good Processability, Easy Processing, Good Stiffness, Good Toughness, Tough, Slip, Unspecified Slip.
Uses
Uses may also be described by the following terms: Closure Caps, Caps, Cap, Food Applications.
Notes
1Typical properties: these are not to be construed as specifications.
26 MPa, 2% Arkopal
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.