IDES Prospector Already have an account? Login Here

IDES

Hytrel® DYM1300 BK320

THERMOPLASTIC POLYESTER ELASTOMER

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Hytrel® DYM1300 BK320 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hytrel® DYM1300 is a high performance thermoplastic elastomer with high modulus, suited for air bag door applications.
General  
Material Status 
  • Preliminary Data 1
Availability 
  • Asia Pacific
  • Europe
  • North America
RoHS Compliance 
Appearance 
  • Black
Processing Method 
  • Injection Molding
Part Marking Code (ISO 11469)
  • >TPC-ET+PBT<
Resin ID (ISO 1043)
  • TPC-ET+PBT
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (240°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow (0.0787 in)
in/in
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Break, 73°F)
psi
 ISO 527-2/1BA
Tensile Stress - 10% Strain (73°F)
psi
 ISO 527-2/1BA
Tensile Strain (Break, 73°F)
%
 ISO 527-2/1BA
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 15 sec)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Melting Temperature 3
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Hytrel® DYM1300 BK320, Hytrel DYM1300 BK320, Hytrel® , Hytrel, HytrelDYM1300BK320, DYM 1300 BK 320, DYM1300 BK320, DYM1300, 1300BK, BK320, DYM1300BK320, Thermoplastic Copolyester Elastomer + PBT, Thermoplastic Copolyester Elastomer PBT, Thermoplastic Copolyester Elastomer : PBT, Thermoplastic Copolyester Elastomer / PBT, Thermoplastic Copolyester Elastomer - PBT, Thermoplastic Copolyester Elastomer _ PBT, Thermoplastic Copolyester Elastomer PBT, TPC-ET+PBT, TPCETPBT, TPC-ET:PBT, TPC-ET/PBT, TPC-ET-PBT, TPC-ET_PBT, TPC-ET PBT, TPC:ET+PBT, TPC/ET+PBT, TPC+ET+PBT, TPC_ET+PBT, TPC ET+PBT, Thermoplastic Elastomer, TPE, DuPont, ThermoplasticCopolyesterElastomerPBT, TPCET_PBT, TPCET PBT, TPC_ETPBT, TPC ETPBT, ThermoplasticElastomer, ThermoplasticCopolyesterElastomer_PBT, 1300DYM
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Melt Temperature, Optimum - Injection Molding
°F
  
Mold Temperature
°F
  
Mold Temperature, Optimum - Injection Molding
°F
  
Notes
1The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
2Typical properties: these are not to be construed as specifications.
310°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.