IDES Prospector Already have an account? Login Here

IDES

Orevac® 18410

High Density Polyethylene

Supplied by Arkema

The technical datasheet with complete property values for Orevac® 18410 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
OREVAC® 18410 is amaleic anhydride modified high-density polyethylene used in pipe-coating technology for multi-layer structures. It is available in pellet form for use in conventional extrusion equipment designed to process polyolefin.

OREVAC® 18410 has been designed to develop a reliable bonding strength onto FBE (Fusion Bonded Epoxy) steel pipe protective layer. It is mainly used as tie layer in three-layer high-density polyethylene coatins (epoxy primer/adhesive/polyethylene), where mechanical and adhesive performances at high temperatures are required.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Good Adhesion
Uses 
  • Adhesives
  • Coating Applications
  • Pipe Coatings
  • Tie-Layer
  
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183, ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238, ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Compression Molded)
psi
 ASTM D638, ISO 527-2
Tensile Strength (Break, Compression Molded)
psi
 ASTM D638, ISO 527-2
Tensile Elongation
      
Yield, Compression Molded
%
 ASTM D638
Break, Compression Molded
%
 ISO 527-2
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
      
Shore D, Compression Molded
 
 ASTM D2240
Shore D
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature 2
°F
 ISO 306/A, ASTM D1525 3
Melting Temperature
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Orevac® 18410, Orevac 18410, Orevac® , Orevac, Orevac18410, 18410, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Arkema, PolyethyleneHighDensity
Features
Features may also be described by the following terms: Good Adhesion.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating, Tie-Layer, Tie Layer.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Die Temperature
°F
  
Extrusion Notes
Fittings - Channels Temperature: 220 to 240°C
Notes
1Typical properties: these are not to be construed as specifications.
2Compression Molded
3Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.