IDES Prospector Already have an account? Login Here

IDES

OnFlex™ S HS 70A-3E2543

Thermoplastic Elastomer

Supplied by GLS Thermoplastic Elastomers

The technical datasheet with complete property values for OnFlex™ S HS 70A-3E2543 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This OnFlex™-S HS thermoplastic elastomer compounds is based on hydrogenated styrenic block copolymers. This range of compounds are formulated to deliver high strength and medium-low density in addition to typical OnFlex™-S properties such as a wide hardness range, good mechanical properties, good processability, good colourability and a wide temperature operating range.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • North America
  • South America
Features 
  • General Purpose
  • High Strength
  
Uses 
  • Appliances
  • Automotive Applications
  • Consumer Applications
  • General Purpose
  • Industrial Applications
RoHS Compliance 
Forms 
  • Pellets
Processing Method 
  • Injection Molding
  • Pipe Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 37
Across Flow: Break, 0.0787 in 2
psi
  
Flow: Break, 0.0787 in 2
psi
  
Flow: Break, 0.0787 in 3
psi
  
Tensile Elongation
     ISO 37
Across Flow: Break, 0.0787 in 2
%
  
Flow: Break, 0.0787 in 2
%
  
Flow: Break, 0.0787 in 3
%
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore A)
 
 ISO 868
Additional Information
Nominal Value
Unit
Test Method
Generic Material Type
 
  
Properties are measured using injection molded plaques.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: OnFlex™ S HS 70A-3E2543, OnFlex S HS 70A3E2543, OnFlex™ , OnFlex, OnFlexSHS70A3E2543, S HS 70 A, S HS 70A, S HS 70 A 3 E 2543, SHS70A, S HS 70A-3E2543, S HS 70A3E2543, S HS 70A:3E2543, S HS 70A/3E2543, S HS 70A+3E2543, S HS 70A_3E2543, S HS 70A 3E2543, SHS, HS70, 70A, A3, 3E, E2543, SHS70A3E2543, SHS70A_3E2543, Thermoplastic Elastomer, TPE, GLS, ThermoplasticElastomer, HSS
Features
Features may also be described by the following terms: High Strength.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Die Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Injection molded
3Extruded
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.