IDES Prospector Already have an account? Login Here

IDES

VESTAMID® L-GF50 natural colored

Polyamide 12

Glass Fiber Reinforcement, 50%

Supplied by Evonik Degussa GmbH

The technical datasheet with complete property values for VESTAMID® L-GF50 natural colored is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Medium-viscosity, heat-stabilized, glass fiber-reinforced, compound based on Nylon 12

VESTAMID L-GF50 is a 50% glass fiberreinforced, easily demoldable and heatstabilized polyamide 12 compound.

Due to its mold release properties, VESTAMID L-GF50 is suitable for the efficient production of injection molded parts with short cycle times.

Further advantages of VESTAMID L-GF50 are the characteristic properties of polyamide 12 as low water absorption, good dimensional stability and almost the same properties at changing ambient humidity.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 50% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Fast Molding Cycle
  • Good Dimensional Stability
  • Good Mold Release
  • Heat Stabilized
  • Low to No Water Absorption
  • Medium Viscosity
Appearance 
  • Natural Color
Forms 
  • Granules
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F, Complete Break
ft·lb/in²
  
73°F, Complete Break
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F, Complete Break
ft·lb/in²
  
73°F, Complete Break
ft·lb/in²
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VESTAMID® L-GF50 natural colored, VESTAMID LGF50 natural colored, VESTAMID® , VESTAMID, VESTAMIDLGF50naturalcolored, L GF 50 natural colored, L-GF50 natural colored, LGF50 natural colored, L:GF50 natural colored, L/GF50 natural colored, L+GF50 natural colored, L_GF50 natural colored, L GF50 natural colored, LGF, GF50, 50natural, naturalcolored, LGF50naturalcolored, L_GF50naturalcolored, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Evonik Degussa, Polyamide12, Nylon12, GFL
Generic Name
Generic Name may also be described by the following terms: PA12.
Features
Features may also be described by the following terms: Medium Viscosity, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Mold Release, Easy Release, Good Demolding, Low Water Absorption, Low Moisture Absorption, Water Resistant, Moisure Resistant, Good Dimensional Stability, Dimensionally Stable, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.