IDES Prospector Already have an account? Login Here

IDES

VESTAMID® LX9010 black 9.7507

Polyamide 12

Supplied by Evonik Degussa GmbH

The technical datasheet with complete property values for VESTAMID® LX9010 black 9.7507 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Plasticized, heat- and light-stabilized polyamide 12 compound for use in multilayer tubing

VESTAMID LX9010 is a plasticized polyamide 12 compound with heat and light stabilizer for the extrusion of multilayer tubing 1000.1 developed by Evonik Degussa GmbH

VESTAMID LX9010 is characterized by easy processing as well as by a high impact strength at low temperatures. VESTAMID LX9010 shows an excellent bonding with VESTODUR X9407 being the adhesive resin in the multilayer tubing 1000.1.

It has to be noticed that material data measured on test specimens do not provide sufficient information to draw conclusions on the final performance of the resin when used in a multilayer tubing.

A further description of design and performance of MLT 1000.1 are contained in our product information „multilayer tubing 1000.1".
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Heat Stabilizer
  • Plasticizer
  • UV Stabilizer
Features 
  • Bondability
  • Good Adhesion
  • Good Processability
  • Good UV Resistance
  • Heat Stabilized
  • Low Temperature Impact Resistance
  • Plasticized
Uses 
  • Tubing
Appearance 
  • Black
Forms 
  • Granules
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain
     ISO 527-2
Yield
%
  
Break
%
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F, Complete Break
ft·lb/in²
  
73°F, Partial Break
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
 
  
73°F
 
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Melting Temperature 2
°F
 ISO 11357-3
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (464°F, 100 sec^-1)
mPa·s
 DIN 54811
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VESTAMID® LX9010 black 9.7507, VESTAMID LX9010 black 97507, VESTAMID® , VESTAMID, VESTAMIDLX9010black97507, LX 9010 black 9 7507, LX9010 black 9.7507, LX9010 black 97507, LX9010, 9010black, black9, 97507, LX9010black97507, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Evonik Degussa, Polyamide12, Nylon12, 9010LX
Generic Name
Generic Name may also be described by the following terms: PA12.
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Bondability, Bondable, Good Adhesion, Good Processability, Easy Processing, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Low Temperatuer Impact Resistance, Low Temp Impact Resistance.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Notes
1Typical properties: these are not to be construed as specifications.
22nd heating
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.