IDES Prospector Already have an account? Login Here

IDES

VESTAMID® LX9057 orange E20081

Polyamide 12

Supplied by Evonik Degussa GmbH

The technical datasheet with complete property values for VESTAMID® LX9057 orange E20081 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Low viscosity, self-extinguishing polyamide 12 compound, free of halogen

VESTAMID LX9057 orange E20081 is a heatstabilized compound with an efficient halogen-free flame retardant. Tested according to UL94, it complies with the flammability classification V-0.

The halogen-free formulation makes VESTAMID LX9057 orange E20081 especially suitable for the electronic and cable industry.

VESTAMID LX9057 orange E20081 can be used for injection molding as well as for wire extrusion coating. The semi-crystalline compounds based on PA 12 only absorb small amounts of water. Therefore manufactured parts exhibit excellent dimensional stability at changing ambient humidity, constant high toughness, low coefficient of friction and good chemical resistance.

Due to the presence of flame retardant melt temperature should not exceed 240 °C. We recommend melt temperatures of 200 °C- 220 °C.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Flame Retardant
  • Heat Stabilizer
  
Features 
  • Flame Retardant
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Toughness
  • Halogen Free
  • Heat Stabilized
  • Low Friction
  • Low Moisture Absorption
  • Low Viscosity
  • Semi Crystalline
Uses 
  • Cable Jacketing
  • Electrical/Electronic Applications
  • Wire & Cable Applications
Appearance 
  • Orange
Forms 
  • Granules
Processing Method 
  • Extrusion Coating
  • Injection Molding
  • Wire & Cable Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain
     ISO 527-2
Yield
%
  
Break
%
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Complete Break)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Melting Temperature 2
°F
 ISO 11357-3
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0315 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VESTAMID® LX9057 orange E20081, VESTAMID LX9057 orange E20081, VESTAMID® , VESTAMID, VESTAMIDLX9057orangeE20081, LX 9057 orange E 20081, LX9057 orange E20081, LX9057, 9057orange, orangeE, E20081, LX9057orangeE20081, Polyamide 12, Nylon 12, Polyamide, Nylon, pa12, Evonik Degussa, Polyamide12, Nylon12, 9057LX
Generic Name
Generic Name may also be described by the following terms: PA12.
Features
Features may also be described by the following terms: Low Moisture Absorption, Low Water Absorption, Water Resistant, Moisture Resistant, Good Toughness, Tough, Good Dimensional Stability, Dimensionally Stable, Good Chemical Resistance, Chemical Resistant, Zero Halogen Content, Halogen Free, Semi-Crystalline, Low Friction, Low Viscosity, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications, Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22nd Heating
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.