IDES Prospector Already have an account? Login Here

IDES

VESTAMID® DX9323 black E70228

Polyamide 612

Glass Fiber Reinforcement, 35%

Supplied by Evonik Degussa GmbH

The technical datasheet with complete property values for VESTAMID® DX9323 black E70228 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Heat-stabilized, impact-modified, glass fiber-reinforced molding compound based on nylon 612 specially suitable for plastic and rubber composites

VESTAMID DX9323 black E70228 is a glass fiber-reinforced, impact-modified PA 612 compound. The material contains about 35% glass fibers, an ageing protective agent and processing aid for a fast and even form filling. VESTAMID DX9323 black E70228 is especially suitable for the production of plastic and rubber composites. This process is patented by Evonik Degussa GmbH.

Parts of VESTAMID DX9323 black E70228 can be directly bonded to rubber, e. g., XNBR, HNBR, AEM or FPM, without using any adhesives or adhesion promoters.

Because of its semi-crystalline morphology VESTAMID DX9323 black E70228 provides an excellent chemical resistance, e.g., against greases, oils, fuels and hydraulic fluids.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 35% Filler by Weight
Additive 
  • Heat Stabilizer
  • Impact Modifier
  
Features 
  • Bondability
  • Fuel Resistant
  • Gasoline Resistance
  • Good Chemical Resistance
  • Good Processability
  • Grease Resistant
  • Heat Stabilized
  • Impact Modified
  • Oil Resistant
  • Semi Crystalline
Uses 
  • Bonding
  • Compounding
  
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Compounding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage 2
     ISO 294-4
Across Flow: 140°F, 0.157 in
%
  
Flow: 140°F, 0.157 in
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F, Complete Break
ft·lb/in²
  
73°F, Complete Break
ft·lb/in²
  
Charpy Unnotched Impact Strength
      
-22°F, Complete Break
ft·lb/in²
 ISO 179/1eU
73°F, Complete Break
ft·lb/in²
 ISO 179/2eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VESTAMID® DX9323 black E70228, VESTAMID DX9323 black E70228, VESTAMID® , VESTAMID, VESTAMIDDX9323blackE70228, DX 9323 black E 70228, DX9323 black E70228, DX9323, 9323black, blackE, E70228, DX9323blackE70228, Polyamide 612, Nylon 612, Polyamide, Nylon, pa612, Evonik Degussa, Polyamide612, Nylon612, 9323DX
Generic Name
Generic Name may also be described by the following terms: PA612, PA6/12.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Semi-Crystalline, Good Chemical Resistance, Chemical Resistant, Good Processability, Easy Processing, Bondability, Bondable.
Uses
Uses may also be described by the following terms: Compounding, Compounds.
Notes
1Typical properties: these are not to be construed as specifications.
2determined on 4 mm sheets with film gate at rim mold temperature 60°C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.