IDES Prospector Already have an account? Login Here

IDES

VESTAMID® EX9350 black E70293

Polyamide 612

Supplied by Evonik Degussa GmbH

The technical datasheet with complete property values for VESTAMID® EX9350 black E70293 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Heat- and weather-resistant, impact-modified polyamide 612 elastomer for extrusion

VESTAMID EX9350 is a PA 612 elastomer extrusion compound developed for the manufacturing of tubing systems, e.g. vacuum brake booster lines.

The compound is in particular suitable for applications, that require a continuous high flexibility even if subjected to high temperature load. In contrast to conventionally plasticized materials (plasticizerloss) tubes made from VESTAMID EX9350 do not stiffen under elevated temperatures.

In comparison with PA 11 and PA 12 compounds the increased melting point allows for increased peak temperatures in use.

The compound is especially suitable for the extrusion of tubing systems that are exposed to increased burst pressures and service temperatures.

The process temperatures should be within a range of 210 to 240 °C.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Additive 
  • Heat Stabilizer
  • Impact Modifier
  • UV Stabilizer
Features 
  • Good Flexibility
  • Good UV Resistance
  • Heat Stabilized
  • Impact Modified
  
Uses 
  • Fuel Lines
  • Tubing
  
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Yield)
psi
 ISO 527-2
Tensile Strain (Yield)
%
 ISO 527-2
Nominal Tensile Strain at Break
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-40°F, Complete Break
ft·lb/in²
  
32°F, Complete Break
ft·lb/in²
  
73°F, Partial Break
ft·lb/in²
  
Charpy Unnotched Impact Strength
     ISO 179/1eU
-40°F
 
  
73°F
 
  
Notched Izod Impact Strength 2 (-40°F)
 
 VW PV3905, SAE J2260
Impact Strength 3
     DIN 73378
-40°F
J
  
73°F
J
  
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 ISO 11357-3
Additional Information
Nominal Value
Unit
Test Method
Hoop Stress - at Burst
     DIN 53758
73°F
psi
  
140°F
psi
  
212°F
psi
  
248°F
psi
  
284°F
psi
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VESTAMID® EX9350 black E70293, VESTAMID EX9350 black E70293, VESTAMID® , VESTAMID, VESTAMIDEX9350blackE70293, EX 9350 black E 70293, EX9350 black E70293, EX9350, 9350black, blackE, E70293, EX9350blackE70293, Polyamide 612, Nylon 612, Polyamide, Nylon, pa612, Evonik Degussa, Polyamide612, Nylon612, 9350EX
Generic Name
Generic Name may also be described by the following terms: PA612, PA6/12.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Good Flexibility, Flexible.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2VW-Audi/880 gm, tubing 12.5x1.25mm
3As molded 72 hrs/150°C, tubing 12.5x1.25mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.