Luvocom® 1/CF/30/TF/13/SI/2/BK Lehmann & Voss Polyamide 66 (Carbon Fiber Reinforcement, 30%)

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Central America

Europe

Latin America

North America

South America

Filler / Reinforcement

Carbon Fiber Reinforcement, 30% Filler by Weight

Additive

Heat Stabilizer

PTFE Lubricant (13%)

Silicone Lubricant (2%)

Features

Electrically Conductive

Good Dimensional Stability

Good Wear Resistance

Heat Stabilized

High Stiffness

High Strength

Low Friction

Low Warpage

Lubricated

Uses

Automotive Applications

Business Equipment

Cams

Engineering Parts

Gears

Textile Applications

Appearance

Black

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage		%	DIN 16901
Water Absorption (73°F, 24 hr)		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Yield)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Coefficient of Friction
vs. Itself - Dynamic
vs. Itself - Static
Flexural Strain		%	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-22°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength			ISO 179/1fU
-22°F		ft·lb/in²
73°F		ft·lb/in²
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Maximum Use Temperature - Short Term		°F
Vicat Softening Temperature		°F	ISO 306/A
CLTE - Flow		in/in/°F	DIN 53752
Thermal Conductivity		Btu·in/hr/ft²/°F	DIN 52612
Continuous Use Temperature		°F	UL 746B
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Insulation Resistance		ohm	IEC 60167
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Luvocom® 1/CF/30/TF/13/SI/2/BK, Luvocom 1CF30TF13SI2BK, Luvocom® , Luvocom, Luvocom1CF30TF13SI2BK, 1/CF/30/TF/13/SI/2/BK, 1CF30TF13SI2BK, 1:CF:30:TF:13:SI:2:BK, 1+CF+30+TF+13+SI+2+BK, 1-CF-30-TF-13-SI-2-BK, 1_CF_30_TF_13_SI_2_BK, 1 CF 30 TF 13 SI 2 BK, 1CF, CF30, 30TF, TF13, 13SI, SI2, 2BK, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Lehmann & Voss, Polyamide66, Nylon66, CF1
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Electrically Conductive, Conducts Electricity, Conductive, Low Friction, High Strength, Low Warpage, Low Warp, Good Wear Resistance, Wear Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, High Stiffness.
Uses
Uses may also be described by the following terms: Business Equipment, Business Machines, Automotive Applications, Automotive Sector, Engineering Parts.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Notes
Drying conditions listed are for a dehumidifying dryer. Vacuum Dryer Conditions: Drying Temperature: 105°C Drying Time: 4 to 6 hr

Notes

¹Typical properties: these are not to be construed as specifications.

Luvocom® 1/CF/30/TF/13/SI/2/BK

Polyamide 66

Carbon Fiber Reinforcement, 30%

Supplied by Lehmann & Voss & Co.