Luvocom® 1/GF/30/TF/15/HS/BK Lehmann & Voss Polyamide 66 (Glass Fiber Reinforcement, 30%)

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Central America

Europe

Latin America

North America

South America

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Additive

Heat Stabilizer

PTFE Lubricant (15%)

Features

Good Stiffness

Good Strength

Good Wear Resistance

Heat Stabilized

Low Friction

Low Warpage

Uses

Automotive Applications

Business Equipment

Engineering Parts

Textile Applications

Appearance

Black

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Molding Shrinkage		%	DIN 16901
Water Absorption (73°F, 24 hr)		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Yield)		%	ISO 527-2
Flexural Modulus		psi	ISO 178
Flexural Strength		psi	ISO 178
Coefficient of Friction
vs. Itself - Dynamic
vs. Itself - Static
Flexural Strain		%	ISO 178
Thermal	Nominal Value	Unit	Test Method
Maximum Use Temperature - Short Term		°F
Vicat Softening Temperature		°F	ISO 306/A
Continuous Use Temperature		°F	UL 746B
Electrical	Nominal Value	Unit	Test Method
Insulation Resistance		ohm	IEC 60167
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Luvocom® 1/GF/30/TF/15/HS/BK, Luvocom 1GF30TF15HSBK, Luvocom® , Luvocom, Luvocom1GF30TF15HSBK, 1/GF/30/TF/15/HS/BK, 1GF30TF15HSBK, 1:GF:30:TF:15:HS:BK, 1+GF+30+TF+15+HS+BK, 1-GF-30-TF-15-HS-BK, 1_GF_30_TF_15_HS_BK, 1 GF 30 TF 15 HS BK, 1GF, GF30, 30TF, TF15, 15HS, HSBK, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Lehmann & Voss, Polyamide66, Nylon66, GF1
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Low Friction, Good Stiffness, Low Warpage, Low Warp, Good Wear Resistance, Wear Resistant, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Strength.
Uses
Uses may also be described by the following terms: Business Equipment, Business Machines, Automotive Applications, Automotive Sector, Engineering Parts.

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Rear Temperature		°F
Middle Temperature		°F
Front Temperature		°F
Nozzle Temperature		°F
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Notes
Drying conditions listed are for a dehumidifying dryer. Vacuum Dryer Conditions: Drying Temperature: 105°C Drying Time: 4 to 6 hr

Notes

¹Typical properties: these are not to be construed as specifications.

Luvocom® 1/GF/30/TF/15/HS/BK

Polyamide 66

Glass Fiber Reinforcement, 30%

Supplied by Lehmann & Voss & Co.