IDES Prospector Already have an account? Login Here

IDES

GELOY* HRA170D Resin

Acrylonitrile Styrene Acrylate + PC

Supplied by SABIC Innovative Plastics Europe

The technical datasheet with complete property values for GELOY* HRA170D Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
GELOY HRA170D resin is a PC-ASA blend with permanent antistatic behavior. It is typically used in applications that require antidust properties and high impact retention. Geloy HRA170D resin is typically used in various outdoor and indoor applications requiring superior heat aging properties and colour stability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Antistatic
  • Good Color Stability
  • Good Heat Aging Resistance
  • Good Impact Resistance
  
Uses 
  • Outdoor Applications
RoHS Compliance 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
      
220°C/10.0 kg
g/10 min
 ASTM D1238
260°C/5.0 kg
g/10 min
 ASTM D1238
220°C/10.0 kg
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR)
     ISO 1133
220°C/10.0 kg
in³/10min
  
260°C/5.0 kg
in³/10min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 2
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 3
psi
 ASTM D638
Yield 4
psi
 ASTM D638
Yield
psi
 ISO 527-2/5
Yield
psi
 ISO 527-2/50
Break 3
psi
 ASTM D638
Break 4
psi
 ASTM D638
Break
psi
 ISO 527-2/5
Break
psi
 ISO 527-2/50
Tensile Elongation
      
Yield 3
%
 ASTM D638
Yield 4
%
 ASTM D638
Yield
%
 ISO 527-2/5
Yield
%
 ISO 527-2/50
Break 3
%
 ASTM D638
Break 4
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus 5
psi
 ISO 178
Flexural Strength 5, 6
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 7
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact
      
-22°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 8
ft·lb/in²
 ISO 180/1A
-22°F 9
ft·lb/in²
 ISO 180/1A
73°F 9
ft·lb/in²
 ISO 180/1A
73°F 8
ft·lb/in²
 ISO 180/1A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (L-Scale)
 
 ISO 2039-2
Shore Hardness (Shore D)
 
 ISO 868
Ball Indentation Hardness (H 358/30)
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed, 2.52 in Span 10
°F
 ISO 75-2/Bf
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 10
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/A120
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Related Terminology
This supplier and product may also be known by these terms: GE Plastics Europe, LNP Engineering Plastics, GE Polymerland Europe, GE Polymerland, GE Plastics

Product names can be difficult to match. You may have searched any one of these terms to find this product: GELOY* HRA170D Resin, GELOY HRA170D Resin, GELOY* , GELOY, GELOYHRA170DResin, HRA 170 D Resin, HRA170D Resin, HRA170, 170D, DResin, HRA170DResin, Acrylonitrile Styrene Acrylate + PC, Acrylonitrile Styrene Acrylate PC, Acrylonitrile Styrene Acrylate : PC, Acrylonitrile Styrene Acrylate / PC, Acrylonitrile Styrene Acrylate - PC, Acrylonitrile Styrene Acrylate _ PC, Acrylonitrile Styrene Acrylate PC, ASA+PC, ASAPC, ASA:PC, ASA/PC, ASA-PC, ASA_PC, ASA PC, Acrylonitrile Styrene Acrylate, ASA, SABIC IP Euro, AcrylonitrileStyreneAcrylatePC, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_PC, 170HRA
Features
Features may also be described by the following terms: Good Color Stability, Good Heat Aging Resistance, Good Impact Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
3Type I, 0.20 in/min
4Type I, 2.0 in/min
50.079 in/min
6Yield
780*10*4 sp=62mm
880*10*3
980*10*4
1080*10*4 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.