IDES Prospector Already have an account? Login Here

IDES

PEARLTHANE® D11H95S

Thermoplastic Polyurethane Elastomer (Polycaprolactone)

Supplied by Merquinsa

The technical datasheet with complete property values for PEARLTHANE® D11H95S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PEARLTHANE® D11H95S is a high performance polycaprolactone copolyester based TPU, supplied in form of translucent, colorless pellets, featuring excellent flow and mechanical properties and an outstanding low compression set value and high temperature resistance. Product recommended for injection-molding applications with an extremely short cycle time.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
  • North America
  
Features 
  • Fast Molding Cycle
  • High Flow
  • High Heat Resistance
  • Low Compression Set
  
Uses 
  • Seals
Agency Ratings 
Appearance 
  • Translucent
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Moisture Content
%
 Internal Method
Elastomers
Nominal Value
Unit
Test Method
Tensile Stress
     ASTM D412
100% Strain
psi
  
300% Strain
psi
  
Tensile Strength (Yield)
psi
 ASTM D412
Tensile Elongation (Break)
%
 ASTM D412
Tear Strength 2
lbf/in
 ASTM D624
Compression Set (212°F, 70.0 hr)
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature (DSC)
°F
 Internal Method
Melting Temperature (DSC) 3
°F
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PEARLTHANE® D11H95S, PEARLTHANE D11H95S, PEARLTHANE® , PEARLTHANE, PEARLTHANED11H95S, D 11 H 95 S, D11H95S, D11, 11H, H95, 95S, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polycaprolactone), Thermoplastic Polyurethane Elastomer Polycaprolactone, TPU-Capro, TPUCapro, TPU:Capro, TPU/Capro, TPU+Capro, TPU_Capro, TPU Capro, Thermoplastic Polyurethane, TPU, Merquinsa, ThermoplasticPolyurethaneElastomerPolycaprolactone, ThermoplasticPolyurethane, 11D
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI, Low Compression Set, High Heat Resistance, Fast Cycle, Rapid Cycle, Productivity, Fast Molding Cycle.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): EC (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Screw L/D Ratio
 
  
Injection Notes
Closing Force: 30 tons
Screw Diameter: 26 mm
Maximum Hydraulic Pressure: 210 bar
Injection Time: 15 sec
Holding Time: 15 sec
Cooling Time: 20 sec
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
3Temperature at which MFI = 10 g/10 min @ 21.6 kg
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.