IDES Prospector Already have an account? Login Here

IDES

apinat® DP1888

Biodegradable Polymers

Supplied by API SpA

The technical datasheet with complete property values for apinat® DP1888 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Biodegradable
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Break
psi
  
300% Strain
psi
  
100% Strain
psi
  
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Elastomers
Nominal Value
Unit
Test Method
Tear Strength
lbf/in
 ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
     ASTM D2240
Shore A
 
  
Shore D
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: apinat® DP1888, apinat DP1888, apinat® , apinat, apinatDP1888, DP 1888, DP1888, Biodegradable Polymers, Biodeg Polymers, API, BiodegradablePolymers, BiodegPolymers, 1888DP
Injection
Nominal Value
Unit
 
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Injection Notes
Injection Pressure: Medium
Back Pressure: Medium/Low
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Extrusion Notes
L/D ratio: 24:1
Compression Screw Ratio: 2.3:1
Screw Speed: 50 rpm
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.