IDES Prospector Already have an account? Login Here

IDES

Makroblend® UT235M

Polycarbonate + PET

Mineral Filler, 15%

Supplied by Bayer MaterialScience AG

The technical datasheet with complete property values for Makroblend® UT235M is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PC/PET Blend, mineral filled, easy flow, low coefficient of linear thermal expansion, easy release, injection molding. Molded parts from UT235M have exceptional dimensional stability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Filler / Reinforcement 
  • Mineral Filler, 15% Filler by Weight
Features 
  • Good Dimensional Stability
  • Good Flow
  • Good Mold Release
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (270°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     ISO 2577
Across Flow: 518°F, 0.118 in 2
%
  
Across Flow: 194°F, 1 hr, 0.118 in 3
%
  
Flow: 518°F, 0.118 in 2
%
  
Flow: 194°F, 1 hr, 0.118 in 3
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress
     ISO 527-2/5
Yield, 73°F
psi
  
Break, 73°F
psi
  
Tensile Strain (Yield, 73°F)
%
 ISO 527-2/5
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2/5
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/A
Unnotched Izod Impact Strength
     ISO 180
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B120
CLTE
     ISO 11359-2
Flow: 73 to 131°F
in/in/°F
  
Flow: 73 to 185°F
in/in/°F
  
Transverse: 73 to 131°F
in/in/°F
  
Transverse: 73 to 185°F
in/in/°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Makroblend® UT235M, Makroblend UT235M, Makroblend® , Makroblend, MakroblendUT235M, UT 235 M, UT235M, UT235, 235M, Polycarbonate + PET, Polycarbonate PET, Polycarbonate : PET, Polycarbonate / PET, Polycarbonate - PET, Polycarbonate _ PET, Polycarbonate PET, PC+PET, PCPET, PC:PET, PC/PET, PC-PET, PC_PET, PC PET, Polycarbonate, PC, pc+pbt, pcpbt, pc:pbt, pc/pbt, pc-pbt, pc_pbt, pc pbt, Bayer Euro, PolycarbonatePET, Polycarbonate_PET, 235UT
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Good Flow, Good Mold Release, Easy Release, Good Demolding.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Notes
1Typical properties: these are not to be construed as specifications.
2150x105x3 mm, 70°C MT, 600 bar
3150x105x3 mm
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.