IDES Prospector Already have an account? Login Here

IDES

Zytel® HTN 51G35NOX BK420

HIGH PERFORMANCE POLYAMIDE RESIN

Glass Fiber Reinforcement, 35%

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Zytel® HTN 51G35NOX BK420 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Zytel® HTN51G35NOX BK083 is a 35% glass reinforced high performance polyamide resin developed for Selective Catalytic Reduction applications that require exposure to water/urea solution. It is also a PPA resin.
General  
Material Status 
  • Preliminary Data 1
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 35% Filler by Weight
RoHS Compliance 
Appearance 
  • Black
Processing Method 
  • Injection Molding
Part Marking Code (ISO 11469)
  • >PA6T/XT-GF35<
Part Marking Code (SAE J1344)
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Break, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® HTN 51G35NOX BK420, Zytel HTN 51G35NOX BK420, Zytel® HTN , Zytel HTN, ZytelHTN51G35NOXBK420, ZytelHTN, HTN 51 G 35 NOX BK 420, HTN51G35NOX BK420, HTN51, HTN, 51 G 35 NOX BK 420, HTN51G35NOXBK420, 51G35NOX BK420, 51G, G35, 35NOX, NOXBK, BK420, 51G35NOXBK420, Polyphthalamide, PPA, Polyamide, Nylon, DuPont, G51, 51HTN
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Melt Temperature, Optimum
°F
  
Mold Temperature
°F
  
Mold Temperature, Optimum
°F
  
Notes
1The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
2Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.