IDES Prospector Already have an account? Login Here

IDES

Zytel® HTN 92G45DH2 BK083

HIGH PERFORMANCE POLYAMIDE RESIN

Glass Fiber Reinforcement, 45%

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Zytel® HTN 92G45DH2 BK083 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Zytel® HTN92G45DH2 BK083 is a 45% glass reinforced high performance polyamide resin using DuPont SHIELD Technology, with high flow and excellent retention of properties after aging at elevated temperatures in air. It is also a PPA resin.
General  
Material Status 
  • Preliminary Data 1
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 45% Filler by Weight
RoHS Compliance 
Appearance 
  • Black
Processing Method 
  • Injection Molding
Multi-Point Data 
  • Isothermal Stress vs. Strain (ISO 11403-1)
Part Marking Code (ISO 11469)
  • >PA6T/66-GF45<
Part Marking Code (SAE J1344)
Physical
Dry
Conditioned
Unit
Test Method
Density
--
g/cm³
 ISO 1183
Molding Shrinkage
       ISO 294-4
Across Flow: 0.0787 in
--
%
  
Flow: 0.0787 in
--
%
  
Water Absorption (73°F, 24 hr)
--
%
 ISO 62
Mechanical
Dry
Conditioned
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Break, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
--
psi
 ISO 178
Flexural Strength (73°F)
--
psi
 ISO 178
Impact
Dry
Conditioned
Unit
Test Method
Charpy Notched Impact Strength
       ISO 179/1eA
-40°F
--
ft·lb/in²
  
73°F
--
ft·lb/in²
  
Charpy Unnotched Impact Strength
       ISO 179/1eU
-22°F
--
ft·lb/in²
  
73°F
--
ft·lb/in²
  
Thermal
Dry
Conditioned
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
--
°F
 ISO 75-2/A
Melting Temperature 3
--
°F
 ISO 11357-3
CLTE
       ISO 11359-2
Flow: -40 to 73°F
--
in/in/°F
  
Flow: 73 to 131°F
--
in/in/°F
  
Flow: 212 to 482°F
--
in/in/°F
  
Transverse: -40 to 73°F
--
in/in/°F
  
Transverse: 73 to 131°F
--
in/in/°F
  
Transverse: 212 to 482°F
--
in/in/°F
  
Electrical
Dry
Conditioned
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Comparative Tracking Index
--
V
 IEC 60112
Electric Strength (73°F, 0.0394 in)
V/mil
 IEC 60243-1
Related Terminology
Dry
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® HTN 92G45DH2 BK083, Zytel HTN 92G45DH2 BK083, Zytel® HTN , Zytel HTN, ZytelHTN92G45DH2BK083, ZytelHTN, HTN 92 G 45 DH 2 BK 083, HTN92G45DH2 BK083, HTN92, HTN, 92 G 45 DH 2 BK 083, HTN92G45DH2BK083, 92G45DH2 BK083, 92G, G45, 45DH, DH2, 2BK, BK083, 92G45DH2BK083, Polyphthalamide, PPA, Polyamide, Nylon, DuPont, G92, 92HTN
Conditioned
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® HTN 92G45DH2 BK083, Zytel HTN 92G45DH2 BK083, Zytel® HTN , Zytel HTN, ZytelHTN92G45DH2BK083, ZytelHTN, HTN 92 G 45 DH 2 BK 083, HTN92G45DH2 BK083, HTN92, HTN, 92 G 45 DH 2 BK 083, HTN92G45DH2BK083, 92G45DH2 BK083, 92G, G45, 45DH, DH2, 2BK, BK083, 92G45DH2BK083, Polyphthalamide, PPA, Polyamide, Nylon, DuPont, G92, 92HTN
Injection
Dry
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Melt Temperature, Optimum
°F
  
Mold Temperature
°F
  
Notes
1The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
2Typical properties: these are not to be construed as specifications.
310°C/min, First Heat
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.