IDES Prospector Already have an account? Login Here

IDES

Alathon® H5220

High Density Polyethylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Alathon® H5220 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Alathon H5220 provides easy processing characteristics and exhibits excellent toughness properties and color as well as low odor and good processing stability. Typical applications include housewares, containers, caps and closures.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Features 
  • Good Colorability
  • Good Processability
  • Good Processing Stability
  • Low to No Odor
  • Ultra High Toughness
Uses 
  • Closures
  • Containers
  • Cups
  • Household Goods
  
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Apparent Density
g/cm³
 ASTM D1895
Melt Mass-Flow Rate (MFR)
g/10 min
 ASTM D1238
Spiral Flow 2 (440°F, 62.5 mil)
 
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus 3
     ASTM D638
--
psi
  
1% Secant
psi
  
Tensile Strength 4
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation 4
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus 5
     ASTM D790
--
psi
  
1% Secant
psi
  
2% Secant
psi
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Unnotched Izod Impact (0°F)
 
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load 6 (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature 7
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Peak Melting Temperature
°F
 ASTM D3418
Peak Crystallization Temperature (DSC)
°F
 ASTM D3418
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Alathon® H5220, Alathon H5220, Alathon® , Alathon, AlathonH5220, H 5220, H5220, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, LyondellBasell, PolyethyleneHighDensity, 5220H
Features
Features may also be described by the following terms: Good Colorability, Low Odor, Good Processability, Easy Processing, Good Processing Stability, Good Process Stability, Ultra High Toughness.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Cylinder Zone 5 Temp.
°F
  
Adapter Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Measures the number of inches of flow produced when molten resin is injected into a long, spiral channel (0.0625" insert), at a constant injection pressure of 1000 psi with a melt temperature of 440°F.
3Type I, 2.0 in/min
4Type IV, 2.0 in/min
50.49 in/min
6Data are for control and development work and not intended for use in design or predicting performance at elevated or sub-ambient temperatures.
7Low Temperature; F50; Measures the number of inches of flow produced when molten resin is injected into a long, spiral channel (0.0625" insert), at a constant injection pressure of 1000 psi with a melt temperature of 440°F.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.