IDES Prospector Already have an account? Login Here

IDES

Pebax® 3533 SP 01

Polyether Block Amide

Supplied by Arkema

The technical datasheet with complete property values for Pebax® 3533 SP 01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polyether block amide PEBAX® 3533 SP 01 is a thermoplstic elastomer made of flexible polyether and rigid polyamide. This SP grade has been developed to be heat and UV resistant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Good UV Resistance
  • Medium Heat Resistance
  
Processing Method 
  • Extrusion
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Molding Shrinkage 2
     Internal Method
Across Flow: 24 hr, 0.157 in
%
  
Flow: 24 hr, 0.157 in
%
  
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179
-22°F
 
  
73°F
 
  
Charpy Unnotched Impact Strength
     ISO 179
-22°F
 
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness
     ISO 868
Shore D
 
  
Shore D, 15 sec
 
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Melting Temperature
°F
 ISO 11357-3
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Pebax® 3533 SP 01, Pebax 3533 SP 01, Pebax® , Pebax, Pebax3533SP01, 3533 SP 01, 3533SP, SP01, 3533SP01, Polyether Block Amide, PEBA-Ether, PEBAEther, PEBA:Ether, PEBA/Ether, PEBA+Ether, PEBA_Ether, PEBA Ether, Thermoplastic Elastomer, TPE, Arkema, PolyetherBlockAmide, ThermoplasticElastomer, SP3533
Features
Features may also be described by the following terms: Medium Heat Resistance, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Mold at 20°C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.