IDES Prospector Already have an account? Login Here

IDES

Pebax® MV 1074 SP 01

Polyether Block Amide

Supplied by Arkema

The technical datasheet with complete property values for Pebax® MV 1074 SP 01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Polyether block amide PEBAX® MV 1074 SP 01 is a thermoplsatic elastomer made of flexible polyether and rigid polyamide. MV 1074 SP 01 is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity. This SP grade has been developed to be heat and UV resistant.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
  • Latin America
  • North America
  • South America
Features 
  • Good UV Resistance
  • Medium Heat Resistance
  
Uses 
  • Blending
  • Compounding
  
Processing Method 
  • Compounding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Water Absorption
     ISO 62
73°F, 24 hr
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ISO 178
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Melting Temperature
°F
 ISO 11357-3
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Charge Decay Time
sec
 MIL B-81705
Optical
Nominal Value
Unit
Test Method
Refractive Index
 
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Pebax® MV 1074 SP 01, Pebax MV 1074 SP 01, Pebax® , Pebax, PebaxMV1074SP01, MV 1074 SP 01, MV1074, 1074SP, SP01, MV1074SP01, Polyether Block Amide, PEBA-Ether, PEBAEther, PEBA:Ether, PEBA/Ether, PEBA+Ether, PEBA_Ether, PEBA Ether, Thermoplastic Elastomer, TPE, Arkema, PolyetherBlockAmide, ThermoplasticElastomer, 1074MV
Features
Features may also be described by the following terms: Medium Heat Resistance, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Uses
Uses may also be described by the following terms: Compounding, Compounds.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.