Pebax® MV 2080 Arkema Polyether Block Amide

Product Description

Polyether block amide PEBAX® MV 2080 is a thermoplsatic elastomer made of flexible polyether and rigid polyamide. MV 2080 is an inherently dissipative polymer and can be dry blended or compounded with an isolative polymer to lower the surface resistivity.

General

Material Status

Commercial: Active

Availability

Africa & Middle East

Asia Pacific

Europe

Latin America

North America

South America

Uses

Blending

Compounding

Processing Method

Compounding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Water Absorption			ISO 62
73°F, 24 hr		%
Equilibrium, 73°F, 50% RH		%
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ISO 178
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore D)			ISO 868
Thermal	Nominal Value	Unit	Test Method
Melting Temperature		°F	ISO 11357-3
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohm	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Optical	Nominal Value	Unit	Test Method
Refractive Index			Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Pebax® MV 2080, Pebax MV 2080, Pebax® , Pebax, PebaxMV2080, MV 2080, MV2080, Polyether Block Amide, PEBA-Ether, PEBAEther, PEBA:Ether, PEBA/Ether, PEBA+Ether, PEBA_Ether, PEBA Ether, Thermoplastic Elastomer, TPE, Arkema, PolyetherBlockAmide, ThermoplasticElastomer, 2080MV
Uses
Uses may also be described by the following terms: Compounding, Compounds.

Notes

¹Typical properties: these are not to be construed as specifications.

Pebax® MV 2080

Polyether Block Amide

Supplied by Arkema