IDES Prospector Already have an account? Login Here

IDES

Makroblend® UT4045 G

Polycarbonate + PET

Glass Fiber Reinforcement, 20%

Supplied by Bayer MaterialScience AG

The technical datasheet with complete property values for Makroblend® UT4045 G is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PC/PBT-Blend, 20% Glass fiber reinforced, easy release, injection molding. Makroblend UT4045G offers a high stiffness, excellent chemical resistance, good flowability and exceptional dimensional stability.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Europe
  
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 20% Filler by Weight
Features 
  • Good Chemical Resistance
  • Good Dimensional Stability
  • Good Flow
  • Good Mold Release
  • High Stiffness
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (260°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     ISO 2577
Across Flow  2
%
  
Across Flow: 194°F, 1 hr
%
  
Flow  2
%
  
Flow: 194°F, 1 hr
%
  
Across Flow: 500°F, 0.118 in 3
%
  
Flow: 500°F, 0.118 in 3
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2/1
Tensile Stress
     ISO 527-2/5
Yield, 73°F
psi
  
Break, 73°F
psi
  
Tensile Strain
     ISO 527-2/5
Yield, 73°F
%
  
Break, 73°F
%
  
Nominal Tensile Strain at Break (73°F)
%
 ISO 527-2/5
Flexural Modulus 4 (73°F)
psi
 ISO 178
Flexural Strength 4 (73°F)
psi
 ISO 178
Flexural Strain at Flexural Strength 5 (73°F)
%
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Unnotched Impact Strength
     ISO 179/1eU
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Notched Izod Impact Strength
     ISO 180/A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Unnotched Izod Impact Strength
     ISO 180
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness
psi
 ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B120
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Makroblend® UT4045 G, Makroblend UT4045 G, Makroblend® , Makroblend, MakroblendUT4045G, UT 4045 G, UT4045 G, UT4045, 4045G, UT4045G, Polycarbonate + PET, Polycarbonate PET, Polycarbonate : PET, Polycarbonate / PET, Polycarbonate - PET, Polycarbonate _ PET, Polycarbonate PET, PC+PET, PCPET, PC:PET, PC/PET, PC-PET, PC_PET, PC PET, Polycarbonate, PC, pc+pbt, pcpbt, pc:pbt, pc/pbt, pc-pbt, pc_pbt, pc pbt, Bayer Euro, PolycarbonatePET, Polycarbonate_PET, 4045UT
Features
Features may also be described by the following terms: Good Dimensional Stability, Dimensionally Stable, Good Flow, Good Mold Release, Easy Release, Good Demolding, Good Chemical Resistance, Chemical Resistant, High Stiffness.
Notes
1Typical properties: these are not to be construed as specifications.
2600 bar
3150x105x3, 80°C MT, 600 bar
40.079 in/min
52 mm/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.