IDES Prospector Already have an account? Login Here

IDES

HANWHA CLNA-8400

Linear Low Density Polyethylene

Supplied by Hanwha Chemical

The technical datasheet with complete property values for HANWHA CLNA-8400 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Hanwha CLNA-8400 is a linear low density polyethylene (LLDPE) produced by the UNIPOL process. It's molecular weight distribution is so broad that it offers an excellent processability and scorch stability. It can be used as base resin of silane-crosslinked low voltage cable insulation, high speed telephone cable insulation and high frequency coaxial inner skin. It combines excellent electrical properties with outstanding stress crack resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  
Features 
  • Crosslinkable
  • Good Electrical Properties
  • Good Processability
  • Good Surface Finish
  • High ESCR (Stress Crack Resist.)
  • Wide Molecular Weight Distribution
Uses 
  • Low Voltage Insulation
  • Wire & Cable Applications
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (122°F, 10% Igepal, F0)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, 1 sec)
 
 ASTM D2240
Aging
Nominal Value
Unit
Test Method
Change in Tensile Strength in Air (275°F, 168 hr)
%
 ASTM D573
Change in Ultimate Elongation in Air (275°F, 168 hr)
%
 ASTM D573
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant (1 MHz)
 
 ASTM D150
Dissipation Factor (1 MHz)
 
 ASTM D150
Additional Information
Nominal Value
Unit
Test Method
Hot Elongation 2
%
 IEC 60502
Set 2
%
 IEC 60502
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: HANWHA CLNA-8400, HANWHA CLNA8400, HANWHA , HANWHACLNA8400, CLNA, CLNA-8400, CLNA8400, CLNA:8400, CLNA/8400, CLNA+8400, CLNA_8400, CLNA 8400, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, PolyethyleneLinearLowDensity, 8400CLNA
Features
Features may also be described by the following terms: Good Processability, Easy Processing, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Electrical Properties, Wide Molecular Weight Distribution, Wide MW Distribution, Broad Molecular Weight Distribution, Good Surface Finish.
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications, Low Voltage Insulation.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2Silane 0.8 phr
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.