IDES Prospector Already have an account? Login Here

IDES

EMERGE™ PC 8330-10

Advanced Resin

Supplied by Styron LLC

The technical datasheet with complete property values for EMERGE™ PC 8330-10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
EMERGE™ PC 8330-10 advanced resin is a transparent, ignition resistant PC resin that contains no chlorinated or brominated or phosphorous based additives. This resin combines good mechanical and high heat properties, maintains excellent processability and contains mold release agent. EMERGE™ PC 8330-10 has a UL94 V0 rating at 2.5 mm.

Applications:
  • A broad range of injection molded applications in the lighting, electronics, electrical and information technology equipment markets.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Mold Release
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (300°C/1.2 kg)
g/10 min
 ISO 1133
Molding Shrinkage - Flow
%
 ISO 294-4
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.126 in, Injection Molded)
psi
 ISO 527-2/1
Tensile Stress
     ISO 527-2/50
Yield, 0.126 in, Injection Molded
psi
  
Break, 0.126 in, Injection Molded
psi
  
Tensile Strain
     ISO 527-2/50
Yield, 0.126 in, Injection Molded
%
  
Break, 0.126 in, Injection Molded
%
  
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in, Injection Molded)
ft·lb/in
 ISO 180/4A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
      
--
°F
 ISO 306/A120
--
°F
 ISO 306/B50
Ball Indentation Temperature
°F
 IEC 60598-1
Electrical
Nominal Value
Unit
Test Method
Needle Flame Test (0.0591 in)
 
 IEC 60695-2-21
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL 2 (0.0984 in)
 
 UL 94
Glow Wire Flammability Index 2
     IEC 60695-2-12
0.0394 in
°F
  
0.0787 in
°F
  
0.118 in
°F
  
Glow Wire Ignition Temperature 2
     IEC 60695-2-13
0.0394 in
°F
  
0.0787 in
°F
  
0.118 in
°F
  
Optical
Nominal Value
Unit
Test Method
Transmittance
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: EMERGE™ PC 8330-10, EMERGE PC 833010, EMERGE™ , EMERGE, EMERGEPC833010, PC 8330, PC 8330-10, PC 833010, PC 8330:10, PC 8330/10, PC 8330+10, PC 8330_10, PC 8330 10, PC8330, 833010, PC833010, PC8330_10, Polycarbonate, PC, Styron, 8330PC
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2This rating not intended to reflect hazards presented by this or any other material under actual fire conditions.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.