IDES Prospector Already have an account? Login Here

IDES

XENOY* 5220U Resin

Polycarbonate + PBT

Supplied by SABIC Innovative Plastics

The technical datasheet with complete property values for XENOY* 5220U Resin is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Unreinforced PBT+PC Alloy. Impact Modified. Improved retention of mechanical properties under UV exposure. Excellent low temperature impact and chemical resistance.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Impact Modifier
Features 
  • Good Chemical Resistance
  • Good UV Resistance
  • Impact Modified
  • Low Temperature Impact Resistance
  
Processing Method 
  • Injection Molding
  • Sheet Extrusion
  
Multi-Point Data 
  • Coefficient of Thermal Expansion vs. Temperature (ASTM E831)
  • Compressive Stress vs. Strain (ASTM D695)
  • Elastic Modulus vs Temperature (ASTM D4065)
  • Flexural DMA (ASTM D4065)
  • Pressure-Volume-Temperature (PVT - Zoller Method)
  • Shear DMA (ASTM D4065)
  • Specific Heat vs. Temperature (ASTM D3417)
  • Tensile Fatigue
  • Tensile Stress vs. Strain (ASTM D638)
  • Thermal Conductivity vs. Temperature (ASTM E1530)
  • Viscosity vs. Shear Rate (ASTM D3835)
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792
--
g/cm³
 ISO 1183
Specific Volume
in³/lb
 ASTM D792
Melt Mass-Flow Rate (MFR) (250°C/5.0 kg)
g/10 min
 ISO 1133
Melt Volume-Flow Rate (MVR) (250°C/5.0 kg)
in³/10min
 ISO 1133
Molding Shrinkage
     Internal Method
Flow: 0.126 in
in/in
  
Across Flow  2
in/in
  
Water Absorption
     ISO 62
Saturation, 73°F
%
  
Equilibrium, 73°F, 50% RH
%
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
      
-- 3
psi
 ASTM D638
-- 4
psi
 ASTM D638
--
psi
 ISO 527-2/1
Tensile Strength
      
Yield 5
psi
 ASTM D638
Yield
psi
 ISO 527-2/50
Break 5
psi
 ASTM D638
Break
psi
 ISO 527-2/50
Tensile Elongation
      
Yield 5
%
 ASTM D638
Yield
%
 ISO 527-2/50
Break 5
%
 ASTM D638
Break
%
 ISO 527-2/50
Flexural Modulus
      
1.97 in Span 6
psi
 ASTM D790
-- 7
psi
 ISO 178
Flexural Strength
      
-- 7, 8
psi
 ISO 178
Yield, 1.97 in Span 6
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength 9 (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact
      
-40°F
ft·lb/in
 ASTM D256
-22°F
ft·lb/in
 ASTM D256
73°F
ft·lb/in
 ASTM D256
-22°F 10
ft·lb/in²
 ISO 180/1A
73°F 10
ft·lb/in²
 ISO 180/1A
Instrumented Dart Impact (73°F, Total Energy)
in·lb
 ASTM D3763
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
      
66 psi, Unannealed, 0.252 in
°F
 ASTM D648
264 psi, Unannealed, 0.126 in
°F
 ASTM D648
264 psi, Unannealed, 0.252 in
°F
 ASTM D648
264 psi, Unannealed, 2.52 in Span 11
°F
 ISO 75-2/Af
Vicat Softening Temperature
      
--
°F
 ASTM D1525 12
--
°F
 ISO 306/B50
--
°F
 ISO 306/B120
CLTE
     ASTM E831, ISO 11359-2
Flow: -40 to 104°F
in/in/°F
  
Transverse: -40 to 104°F
in/in/°F
  
Electrical
Nominal Value
Unit
Test Method
Arc Resistance (PLC) 13
 
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0590 in)
 
 UL 94
UL
Nominal Value
Unit
Test Method
RTI Str
°F
 UL 746
RTI Imp
°F
 UL 746
RTI Elec
°F
 UL 746
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)
 
 UL 746
Hot-wire Ignition (HWI) (PLC)
 
 UL 746
High Amp Arc Ignition (HAI) (PLC)
 
 UL 746
Outdoor Suitability
 
 UL 746C
Related Terminology
This supplier and product may also be known by these terms: GE Plastics, LNP Engineering Plastics, GE Polymerland

Product names can be difficult to match. You may have searched any one of these terms to find this product: XENOY* 5220U Resin, XENOY 5220U Resin, XENOY* , XENOY, XENOY5220UResin, 5220 U Resin, 5220U Resin, 5220U, UResin, 5220UResin, Polycarbonate + PBT, Polycarbonate PBT, Polycarbonate : PBT, Polycarbonate / PBT, Polycarbonate - PBT, Polycarbonate _ PBT, Polycarbonate PBT, PC+PBT, PCPBT, PC:PBT, PC/PBT, PC-PBT, PC_PBT, PC PBT, Polycarbonate, PC, SABIC IP, PolycarbonatePBT, Polycarbonate_PBT, U5220
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Chemical Resistance, Chemical Resistant, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Drying Time, Maximum
hr
  
Suggested Max Moisture
%
  
Suggested Shot Size
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Vent Depth
in
  
Extrusion
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Drying Time (Cumulative): 8 hrs
Roll Stack Temp - Bottom: 82 - 93 °C
Roll Stack Temp - Middle: 77 - 82 °C
Roll Stack Temp - Top: 71 - 82 °C
Notes
1Typical properties: these are not to be construed as specifications.
2Tensile Bar
30.20 in/min
42.0 in/min
5Type I, 2.0 in/min
60.051 in/min
70.079 in/min
8Yield
980*10*4 sp=62mm
1080*10*4
1180*10*4 mm
12Rate B (120°C/h), Loading 2 (50 N)
13Tungsten Electrode
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.