IDES Prospector Already have an account? Login Here

IDES

Biograde® C 7500

Biodegradable Polymers

Supplied by FKuR Kunststoff GmbH

The technical datasheet with complete property values for Biograde® C 7500 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Biodegradable
  • Renewable Resource Content
 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Apparent Density
g/cm³
ISO 60
Melt Mass-Flow Rate (MFR) (230°C/5.0 kg)
g/10 min
ISO 1133
Melt Volume-Flow Rate (MVR) (230°C/5.0 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress
     
Break
psi
ISO 527-2
--
psi
ISO 527
Tensile Strain (Break)
%
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength (3.5% Strain)
psi
ISO 178
Flexural Strain at Break
%
ISO 178
Tensile Strain at Tensile Strength
%
ISO 527
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
 
ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
DIN 53505
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
ISO 306/A
Melting Temperature (DSC)
°F
ISO 3146
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Biograde® C 7500, Biograde C 7500, Biograde® , Biograde, BiogradeC7500, C 7500, C7500, Biodegradable Polymers, Biodeg Polymers, FKuR, BiodegradablePolymers, BiodegPolymers, 7500C
Features
Features may also be described by the following terms: Renewable Resources, From Renewable Resources, Renewable Resource Derived, Renewable Raw Materials, Renewable Resource Content.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.