IDES Prospector Already have an account? Login Here

IDES

ALCOM® ABS 530/23 HGB

Acrylonitrile Butadiene Styrene

Glass Bead, 23%

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for ALCOM® ABS 530/23 HGB is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Bead, 23% Filler by Weight
Features 
  • Low Density
  • Low Warpage
 
Uses 
  • Automotive Applications
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183
Melt Volume-Flow Rate (MVR) (220°C/10.0 kg)
in³/10min
ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
ISO 527-2
Tensile Stress (Break)
psi
ISO 527-2
Flexural Modulus
psi
ISO 178
Flexural Strength
psi
ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
ISO 179/1eU
Hardness
Nominal Value
Unit
Test Method
Ball Indentation Hardness (H 358/30)
psi
ISO 2039-1
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
ISO 75-2/A
Vicat Softening Temperature
°F
ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® ABS 530/23 HGB, ALCOM ABS 53023 HGB, ALCOM® ABS , ALCOM ABS, ALCOMABS53023HGB, ALCOMABS, ABS 530 23 HGB, ABS 530, 530, ABS530/23 HGB, ABS53023 HGB, ABS530:23 HGB, ABS530+23 HGB, ABS530-23 HGB, ABS530_23 HGB, ABS530 23 HGB, ABS530, ABS53023HGB, 530/23 HGB, 53023 HGB, 530:23 HGB, 530+23 HGB, 530-23 HGB, 530_23 HGB, 530 23 HGB, 53023, 23HGB, ABS530_23HGB, 53023HGB, 530_23HGB, Acrylonitrile Butadiene Styrene, ABS, Albis Euro, AcrylonitrileButadieneStyrene, 23530, 530ABS
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, Low Warpage, Low Warp.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Notes
Dry Air (Dessicant) Dryer Drying Time: 2 to 4 hr
Air Circulating Dryer Drying Time: 3 to 6 hr
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.