IDES Prospector Already have an account? Login Here

IDES

ALCOM® PP 620/30 TCD1

Polypropylene

Unspecified Filler\Reinfor.

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for ALCOM® PP 620/30 TCD1 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Unspecified Filler\Reinfor.
Features 
  • Thermally Conductive
Uses 
  • Engineering Parts
  • Housings
  
Appearance 
  • White
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Thermal Conductivity
Btu·in/hr/ft²/°F
 ISO 22007-2.2
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.126 in)
 
 UL 94
Glow Wire Flammability Index (0.0394 in)
°F
 IEC 60695-2-12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PP 620/30 TCD1, ALCOM PP 62030 TCD1, ALCOM® PP , ALCOM PP, ALCOMPP62030TCD1, ALCOMPP, PP 620 30 TCD 1, PP 620, 620, PP620/30 TCD1, PP62030 TCD1, PP620:30 TCD1, PP620+30 TCD1, PP620-30 TCD1, PP620_30 TCD1, PP620 30 TCD1, PP620, 620 30 TCD 1, PP62030TCD1, 620/30 TCD1, 62030 TCD1, 620:30 TCD1, 620+30 TCD1, 620-30 TCD1, 620_30 TCD1, 620 30 TCD1, 62030, 30TCD, TCD1, PP620_30TCD1, 62030TCD1, 620_30TCD1, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 30620, 620PP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Uses
Uses may also be described by the following terms: Housings, Housing, Engineering Parts.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.