IDES Prospector Already have an account? Login Here

IDES

ALCOM® PP 620/8 GF30 PTFE15

Polypropylene Homopolymer

Glass Fiber Reinforcement, 30%

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for ALCOM® PP 620/8 GF30 PTFE15 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 30% Filler by Weight
Additive 
  • Heat Stabilizer
  • PTFE Lubricant (15%)
  
Features 
  • Good Wear Resistance
  • Heat Stabilized
  • Homopolymer
Uses 
  • Automotive Applications
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PP 620/8 GF30 PTFE15, ALCOM PP 6208 GF30 PTFE15, ALCOM® PP , ALCOM PP, ALCOMPP6208GF30PTFE15, ALCOMPP, PP 620 8 GF 30 PTFE 15, PP 620, 620, PP620/8 GF30 PTFE15, PP6208 GF30 PTFE15, PP620:8 GF30 PTFE15, PP620+8 GF30 PTFE15, PP620-8 GF30 PTFE15, PP620_8 GF30 PTFE15, PP620 8 GF30 PTFE15, PP620, 620 8 GF 30 PTFE 15, PP6208GF30PTFE15, 620/8 GF30 PTFE15, 6208 GF30 PTFE15, 620:8 GF30 PTFE15, 620+8 GF30 PTFE15, 620-8 GF30 PTFE15, 620_8 GF30 PTFE15, 620 8 GF30 PTFE15, 6208, 8GF, GF30, 30PTFE, PTFE15, PP620_8GF30PTFE15, 6208GF30PTFE15, 620_8GF30PTFE15, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Albis Euro, PolypropyleneHomopolymer, PPHomopolymer, 8620, 620PP
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Good Wear Resistance, Wear Resistant.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Notes
Circulating Dryer Temperature: 80 to 120°C
Circulating Dryer Time: 2 to 4 hr
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.