Already have an account? Login Here

IDES

ALTECH® PP-H A 2030/652 GF30 UV CP

Polypropylene Homopolymer

Glass Fiber Reinforcement, 30%

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for ALTECH® PP-H A 2030/652 GF30 UV CP is available to members of the Prospector Plastics Database.
Register to view full datasheet.

Register to View Full Datasheet

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 30% Filler by Weight

Additive

UV Stabilizer

Features

Chemically Coupled

Homopolymer

Light Stabilized

Processing Method

Injection Molding

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)		in³/10min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ISO 527-2
Tensile Stress (Break)		psi	ISO 527-2
Tensile Strain (Break)		%	ISO 527-2
Flexural Strength		psi	ISO 178
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength		ft·lb/in²	ISO 179/1eA
Charpy Unnotched Impact Strength		ft·lb/in²	ISO 179/1eU
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (264 psi, Unannealed)		°F	ISO 75-2/A
Vicat Softening Temperature		°F	ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 2030/652 GF30 UV CP, ALTECH PPH A 2030652 GF30 UV CP, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA2030652GF30UVCP, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 2030 652 GF 30 UV CP, ALTECHPP_H, A 2030, PP-HA 2030/652 GF30 UV CP, PPHA 2030652 GF30 UV CP, PP-HA 2030:652 GF30 UV CP, PP-HA 2030+652 GF30 UV CP, PP-HA 2030-652 GF30 UV CP, PP-HA 2030_652 GF30 UV CP, PP-HA 2030 652 GF30 UV CP, PP:HA 2030/652 GF30 UV CP, PP/HA 2030/652 GF30 UV CP, PP+HA 2030/652 GF30 UV CP, PP_HA 2030/652 GF30 UV CP, PP HA 2030/652 GF30 UV CP, PPHA, HA2030, PP-HA 2030, PPHA 2030, PP:HA 2030, PP/HA 2030, PP+HA 2030, PP_HA 2030, PP HA 2030, A 2030 652 GF 30 UV CP, PPHA2030652GF30UVCP, PPHA 2030_652 GF30 UV CP, PPHA 2030 652 GF30 UV CP, PP_HA 2030652 GF30 UV CP, PP HA 2030652 GF30 UV CP, PPHA2030, A 2030/652 GF30 UV CP, A 2030652 GF30 UV CP, A 2030:652 GF30 UV CP, A 2030+652 GF30 UV CP, A 2030-652 GF30 UV CP, A 2030_652 GF30 UV CP, A 2030 652 GF30 UV CP, A2030, 2030652, 652GF, GF30, 30UV, UVCP, PPHA2030_652GF30UVCP, PP_HA2030652GF30UVCP, PP_HA2030, A2030652GF30UVCP, A2030_652GF30UVCP, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, Albis Euro, PolypropyleneHomopolymer, PPHomopolymer, 2030A, HAPP

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Processing (Melt) Temp		°F
Mold Temperature		°F
Injection Notes
Circulating Dryer Temperature: 80 to 120°C Circulating Dryer Time: 2 to 4 hr

Notes

¹Typical properties: these are not to be construed as specifications.

IDES

Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.