IDES Prospector Already have an account? Login Here

IDES

ALTECH® PP-H A 4920/178 MR20

Polypropylene

Talc Filler, 20%

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for ALTECH® PP-H A 4920/178 MR20 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Volume-Flow Rate (MVR) (230°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALTECH® PP-H A 4920/178 MR20, ALTECH PPH A 4920178 MR20, ALTECH® PP-H , ALTECH PPH, ALTECH® PP:H, ALTECH® PP/H, ALTECH® PP+H, ALTECH® PP_H, ALTECH® PP H, ALTECHPPHA4920178MR20, ALTECHPPH, ALTECH PP_H, ALTECH PP H, PP HA 4920 178 MR 20, ALTECHPP_H, A 4920, PP-HA 4920/178 MR20, PPHA 4920178 MR20, PP-HA 4920:178 MR20, PP-HA 4920+178 MR20, PP-HA 4920-178 MR20, PP-HA 4920_178 MR20, PP-HA 4920 178 MR20, PP:HA 4920/178 MR20, PP/HA 4920/178 MR20, PP+HA 4920/178 MR20, PP_HA 4920/178 MR20, PP HA 4920/178 MR20, PPHA, HA4920, PP-HA 4920, PPHA 4920, PP:HA 4920, PP/HA 4920, PP+HA 4920, PP_HA 4920, PP HA 4920, A 4920 178 MR 20, PPHA4920178MR20, PPHA 4920_178 MR20, PPHA 4920 178 MR20, PP_HA 4920178 MR20, PP HA 4920178 MR20, PPHA4920, A 4920/178 MR20, A 4920178 MR20, A 4920:178 MR20, A 4920+178 MR20, A 4920-178 MR20, A 4920_178 MR20, A 4920 178 MR20, A4920, 4920178, 178MR, MR20, PPHA4920_178MR20, PP_HA4920178MR20, PP_HA4920, A4920178MR20, A4920_178MR20, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, Albis Euro, PolypropyleneUnspecified, PPUnspecified, 4920A, HAPP
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.