IDES Prospector Already have an account? Login Here

IDES

Lupolen 1817 H 01

Low Density Polyethylene

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for Lupolen 1817 H 01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
Uses 
  • Automotive Applications
  • Blow Molding Applications
  • Construction Applications
  • Piping
  • Profiles
Processing Method 
  • Blow Molding
  • Extrusion
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 DIN 53479
Melt Volume-Flow Rate (MVR) (190°C/2.16 kg)
in³/10min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 DIN 53457
Tensile Strain (Break)
%
 DIN 53455
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 DIN 53505
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B50
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0295 in)
 
 UL 94
Glow Wire Flammability Index (0.157 in)
°F
 VDE 0471/1.2
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Lupolen 1817 H 01, Lupolen , Lupolen1817H01, 1817 H 01, 1817H, H01, 1817H01, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Albis Euro, PolyethyleneLowDensity, H1817
Uses
Uses may also be described by the following terms: Piping, Pipe, Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.