IDES Prospector Already have an account? Login Here

IDES

TEDUR® L FC 9510-5

Polyphenylene Sulfide

Glass Fiber Reinforcement, 40%

Supplied by ALBIS PLASTIC GmbH

The technical datasheet with complete property values for TEDUR® L FC 9510-5 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 40% Filler by Weight
Features 
  • Food Contact Acceptable
  • High Flow
  • High Rigidity
  • High Strength
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Outer Fiber Strain
%
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Melting Temperature
°F
 ISO 11357-3
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Glow Wire Flammability Index (0.0787 in)
°F
 IEC 60695-2-12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: TEDUR® L FC 9510-5, TEDUR L FC 95105, TEDUR® , TEDUR, TEDURLFC95105, L FC 9510, LFC9510, L FC 9510-5, L FC 95105, L FC 9510:5, L FC 9510/5, L FC 9510+5, L FC 9510_5, L FC 9510 5, LFC, FC9510, 95105, LFC95105, LFC9510_5, Polyphenylene Sulfide, PPS, Albis Euro, PolyphenyleneSulfide, FCL
Features
Features may also be described by the following terms: High Strength, High Rigidity, High Flow, High Melt, High MFI.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.