IDES Prospector Already have an account? Login Here

IDES

SABIC® HDPE F00952J

High Density (HMW) Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® HDPE F00952J is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Description
SABIC® HDPE F00952J resin is a high molecular weight, high density polyethylene copolymer which has a broad molecular weight distribution. The design of the product, molecular architecture and density, gives F00952J an unique combination of easy extrusion and high melt strength with strong physical properties which makes it suitable for producing very thin films with excellent strenght and rigidity. The material contains anti oxidant .

Application
SABIC® HDPE F00952J resin is recommended for blown film extrusion. This product is suggested for the manufacture of high strength grocery sacks, shopping bags and high quality thin films for multi wall sack liners and replacement for thin paper products.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Broad Seal Range
  • Good Drawdown
  • Good Impact Resistance
  • Good Melt Strength
  • Good Stiffness
  • Good Toughness
  • High Density
  • High Molecular Weight
  • Wide Molecular Weight Distribution
Uses 
  • Bags
  • Film
  • Food Packaging
  • Liners
  
Processing Method 
  • Blown Film
  • Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Elastic Modulus - MD (0.59 mil)
psi
 ASTM D882
Elastic Modulus - TD (0.59 mil)
psi
 ASTM D882
Tensile Strength
     ASTM D882
MD: Yield, 0.59 mil
psi
  
TD: Yield, 0.59 mil
psi
  
MD: Break, 0.59 mil
psi
  
TD: Break, 0.59 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 0.59 mil
%
  
TD: Break, 0.59 mil
%
  
Dart Drop Impact 2 (0.59 mil)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 0.59 mil
g
  
TD: 0.59 mil
g
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE F00952J, SABIC HDPE F00952J, SABIC® HDPE , SABIC HDPE, SABICHDPEF00952J, SABICHDPE, HDPEF 00952 J, HDPEF00952J, HDPEF00952, HDPE, F 00952 J, F00952J, F00952, 00952J, Polyethylene, High Density, Polyethylene High Density, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, PE, SABIC, PolyethyleneHighDensityHMW, HDPEHMW, 00952F, 00952HDPEF
Features
Features may also be described by the following terms: High Density, High Specific Gravity, Good Melt Strength, Wide Molecular Weight Distribution, Wide MW Distribution, Broad Molecular Weight Distribution, High Molecular Weight, High MW, Good Drawdown, Good draw down, Good Impact Resistance, Broad Seal Range, Good Stiffness, Good Toughness, Tough.
Uses
Uses may also be described by the following terms: Food Packaging.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
2F50
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.