IDES Prospector Already have an account? Login Here

IDES

Resinoid 2277

Phenolic

Glass Fiber Reinforcement

Supplied by Resinoid Engineering Corporation

The technical datasheet with complete property values for Resinoid 2277 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Resinoid 2277 is a chopped fabric reinforced, two-step phenolic molding compound. It was specifically developed for molding applications where a lightweight, high strength material with good impact strength is needed. This material comes in pelletized from and is suitable for transfer or compression molding and can be used in injection molding systems with deep flight screws. Resinoid 2277 meets the requirements of ASTM D-5948 CFI-20 (Formerly MIL M14/1 CFI-20).
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Features 
  • Good Impact Resistance
  • High Strength
  
Agency Ratings 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Compression Molding
  • Injection Molding
  • Resin Transfer Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
      
--
 
 ASTM D792A
--
g/cm³
 ISO 1183
Molding Shrinkage
      
Flow
in/in
 ASTM D955
--
%
 ISO 294-4
Water Absorption (73°F, 24 hr)
%
 ASTM D570, ISO 62
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield)
psi
 ASTM D638, ISO 527-2
Flexural Modulus
psi
 ASTM D790, ISO 178
Flexural Strength
psi
 ASTM D790, ISO 178
Compressive Strength
psi
 ASTM D695, ISO 604
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
      
--
ft·lb/in
 ASTM D256A
--
ft·lb/in²
 ISO 180/2A
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
 ASTM D149, IEC 60243-1
Arc Resistance
sec
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.250 in)
 
 UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Resinoid 2277, Resinoid , Resinoid2277, 2277, Phenolic, Resinold
Features
Features may also be described by the following terms: Good Impact Resistance, High Strength.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): ASTM (1).
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.