IDES Prospector Already have an account? Login Here

IDES

InnoPlus LD2420F

Low Density Polyethylene

Supplied by PTT Chemical Public Company Limited

The technical datasheet with complete property values for InnoPlus LD2420F is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Special Characteristics : InnoPlus LD2420F is produced by high pressure tubular process, a technology licensed by LyondellBasell. This grade offers excellent processability for increased extruder outputs, good balance of mechanical and optical properties, exceptional clarity and gloss.

Typical Applications : InnoPlus LD2420F is recommended for producing the heavy duty films, liners, shrink hoods, bags & pouches and agricultural films.

Additives : No additives
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Additive Free
  • Good Processability
  • High Clarity
  • High Gloss
  • Opticals
Uses 
  • Agricultural Applications
  • Bags
  • Film
  • Liners
  • Shrink Wrap
Appearance 
  • Clear/Transparent
Processing Method 
  • Film Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (Compression Molded)
psi
 ISO 527-2
Tensile Stress (Yield, Compression Molded)
psi
 ISO 527-2
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Stress
     ISO 527-3
MD: Break, 2.8 mil, Blown Film
psi
  
TD: Break, 2.8 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.8 mil, Blown Film
%
  
TD: Break, 2.8 mil, Blown Film
%
  
Dart Drop Impact (2.8 mil, Blown Film)
g
 ASTM D1709
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Melting Temperature
°F
 ISO 11357-3
Optical
Nominal Value
Unit
Test Method
Gloss (20°, 2.76 mil, Blown Film)
 
 ASTM D2457
Haze (2.76 mil, Blown Film)
%
 ASTM D1003
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: InnoPlus LD2420F, InnoPlus , InnoPlusLD2420F, LD 2420 F, LD2420F, LD2420, 2420F, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, PTT Chemical, PolyethyleneLowDensity, 2420LD
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Additive Free, No Additives, High Clarity, High Gloss.
Uses
Uses may also be described by the following terms: Shrink Wrap.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.