SABIC® LDPE 2201TS41 SABIC Polyethylene, Low Density

Product Description

Description
SABIC® LDPE 2201TS41 is a grade with a very high amount of anti block and a low amount of slip erucamide. The grade contains anti oxidant. The grade shows good optical properties.

Application
SABIC® LDPE 2201TS41 is specially developed for applications where stabilisation is required during extrusion, storage and usage. Films from this grade show low reblocking values.

Film properties
Film properties have been measured at film of 50 µm with a BUR = 3.
The film has been produced on Kiefel IBC blown film line with 200 kg/h. Die size 200 mm, die gap 0.8 mm.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antioxidant

High Antiblock

Low Slip

Features

Antioxidant

High Antiblocking

Low Slip

Opticals

Uses

Film

Processing Method

Blown Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Additional Information	Nominal Value	Unit	Test Method
Antiblock Additive		mg/kg	Internal Method
Slip Additive		mg/kg	Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2201TS41, SABIC LDPE 2201TS41, SABIC® LDPE , SABIC LDPE, SABICLDPE2201TS41, SABICLDPE, LDPE 2201 TS 41, LDPE2201TS41, LDPE2201, LDPE, 2201 TS 41, 2201TS41, 2201TS, TS41, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, TS2201, 2201LDPE
Features
Features may also be described by the following terms: High Antiblocking, High Antiblock, Low Slip.

Notes

¹Typical properties: these are not to be construed as specifications.

SABIC® LDPE 2201TS41

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)