IDES Prospector Already have an account? Login Here

IDES

VICTREX® PEEK 150UF10

Polyetheretherketone

Supplied by Victrex plc

The technical datasheet with complete property values for VICTREX® PEEK 150UF10 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
High performance thermoplastic material, unreinforced PolyEtherEtherKetone (PEEK), semi crystalline, fine powder for composite manufacture, easy flow, FDA food contact compliant, colour natural.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Features 
  • Food Contact Acceptable
  • Good Flow
  • Semi Crystalline
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Powder
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Apparent Density
g/cm³
 ISO 1183
Average Particle Size - D50
mil
 ISO 13320-1
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Yield, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Flexural Strength (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/A
Unnotched Izod Impact Strength (73°F)
 
 ISO 180
Thermal
Nominal Value
Unit
Test Method
Glass Transition Temperature
°F
 ISO 11357-2
Melting Temperature
°F
 ISO 11357-3
Fill Analysis
Nominal Value
Unit
Test Method
Melt Viscosity (752°F)
Pa·s
 ISO 11443
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: VICTREX® PEEK 150UF10, VICTREX PEEK 150UF10, VICTREX® PEEK , VICTREX PEEK, VICTREXPEEK150UF10, VICTREXPEEK, PEEK 150 UF 10, PEEK150UF10, PEEK150, PEEK, 150 UF 10, 150UF10, 150UF, UF10, Polyetheretherketone, Polyaryletherketone, PAEK, Victrex, UF150, 150PEEK
Features
Features may also be described by the following terms: Semi-Crystalline, Good Flow.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Processing (Melt) Temp
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.