IDES Prospector Already have an account? Login Here

IDES

SABIC® Vestolen P 9421-66407

Polypropylene Random Copolymer

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® Vestolen P 9421-66407 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This random copolymer has a high molecular weight with special designed properties required for high demanding pressure pipes. It is highly heat stabilised and especially formulated for extraction resistance. This grade with long service life is used for the manufacturing of cold and hot water pipes and fittings for transport of drinking water. It complies with German regulations for materials in contact with water intended for human consumption (BGA requirements and KTW recommendations).

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Heat Stabilizer
Features 
  • Extraction Resistant
  • Heat Stabilized
  • High Molecular Weight
  • Random Copolymer
  
Uses 
  • Fittings
  • Piping
  
Agency Ratings 
 
Appearance 
  • Green
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/5.0 kg
g/10 min
  
230°C/2.16 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/4A
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
      
--
°F
 ISO 306/A
--
°F
 ISO 306/B
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® Vestolen P 9421-66407, SABIC Vestolen P 942166407, SABIC® Vestolen P , SABIC Vestolen P, SABICVestolenP942166407, SABICVestolenP, P 9421 66407, P 9421, 9421, P9421-66407, P942166407, P9421:66407, P9421/66407, P9421+66407, P9421_66407, P9421 66407, P9421, 9421-66407, 942166407, 9421:66407, 9421/66407, 9421+66407, 9421_66407, 9421 66407, Polypropylene Random Copolymer, PP Random Copolymer, Polypropylene, PP, SABIC, PolypropyleneRandomCopolymer, PPRandomCopolymer, 664079421, 9421P
Features
Features may also be described by the following terms: High Molecular Weight, High MW, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Extraction Resistant, Resists Extraction, Random Copolymer.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): KTW (1), BGA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.