Elastollan® 1160 A 13 P Elastogran Euro Thermoplastic Polyurethane Elastomer (Polyether)

Product Description

Aromatic Ether-TPU, plasticized, phthalate-free.

Processable by injection moulding

General

Material Status

Availability

Additive

Features

Forms

Processing Method

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Mechanical	Nominal Value	Unit	Test Method
Abrasion Loss (73°F)		mm³	ISO 4649-A
Elastomers	Nominal Value	Unit	Test Method
Tensile Stress (Yield, 73°F)		psi	DIN 53504-S2
Tensile Elongation (Break, 73°F)		%	DIN 53504-S2
Tear Strength² (73°F)		lbf/in	ISO 34-1
Hardness	Nominal Value	Unit	Test Method
Shore Hardness (Shore A, 73°F, Injection Molded)			DIN 53505
Additional Information
Test plaques are manufactured by injection moulding from pre-dried granules (water content of = 0.02%). Test plaques are aged 20 hrs at 100°C. Specimens are cut from test plaques. Test conditions: 23°C ± 2°C and 50% ± 6% rel. humidity.
Related Terminology
This supplier and product may also be known by these terms: Elastolan, Ellastolan Product names can be difficult to match. You may have searched any one of these terms to find this product: Elastollan® 1160 A 13 P, Elastollan 1160 A 13 P, Elastollan® , Elastollan, Elastollan1160A13P, 1160 A 13 P, 1160A, A13, 13P, 1160A13P, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyether), Thermoplastic Polyurethane Elastomer Polyether, TPU-Polyether, TPUPolyether, TPU:Polyether, TPU/Polyether, TPU+Polyether, TPU_Polyether, TPU Polyether, Thermoplastic Polyurethane, TPU, Elastogran Euro, ThermoplasticPolyurethaneElastomerPolyether, ThermoplasticPolyurethane, A1160
Features
Features may also be described by the following terms: Non-Phthalate Plasticizer, Non-Phth, NonPhth.

Notes

¹Typical properties: these are not to be construed as specifications.

²Method Bb, Angle (Nicked)

Elastollan® 1160 A 13 P