IDES Prospector Already have an account? Login Here

IDES

LG ABS ER461

Acrylonitrile Butadiene Styrene

Supplied by LG Chem Ltd.

The technical datasheet with complete property values for LG ABS ER461 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Features 
  • High Heat Resistance
Uses 
  • Automotive Exterior Parts
  • Automotive Interior Parts
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 0.126 in)
psi
 ASTM D638
Tensile Elongation 2
     ASTM D638
Yield, 0.126 in
%
  
Break, 0.126 in
%
  
Flexural Modulus 3 (0.126 in)
psi
 ASTM D790
Flexural Strength 3 (0.126 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256
-22°F, 0.126 in
ft·lb/in
  
-22°F, 0.252 in
ft·lb/in
  
73°F, 0.126 in
ft·lb/in
  
73°F, 0.252 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 4
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
      
--
ohm·cm
 ASTM D257
--
ohm·cm
 IEC 60093
Dielectric Strength (73°F, 0.0394 in)
V/mil
 ASTM D149
Arc Resistance
sec
 ASTM D495
Arc Resistance (PLC)
 
 ASTM D495
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0591 in, ALL
 
  
0.118 in, ALL
 
  
UL
Nominal Value
Unit
Test Method
RTI Str
     UL 746
0.0591 in
°F
  
0.118 in
°F
  
RTI Imp
     UL 746
0.0591 in
°F
  
0.118 in
°F
  
RTI Elec
     UL 746
0.0591 in
°F
  
0.118 in
°F
  
Comparative Tracking Index (CTI) (PLC)
 
 UL 746
High Voltage Arc Tracking Rate (HVTR) (PLC)
 
 UL 746
Hot-wire Ignition (HWI) (PLC)
     UL 746
0.0591 in
 
  
0.118 in
 
  
High Amp Arc Ignition (HAI) (PLC)
     UL 746
0.0591 in
 
  
0.118 in
 
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: LG ABS ER461, LG ABS , LGABSER461, LGABS, ABSER 461, ABSER461, ABS, ER 461, ER461, Acrylonitrile Butadiene Styrene, LG Chem, AcrylonitrileButadieneStyrene, 461ER, 461ABSER
Features
Features may also be described by the following terms: High Heat Resistance.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Nozzle Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Back Pressure
psi
  
Screw Speed
rpm
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.59 in/min
4Rate A (50°C/h), Loading 2 (50 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.