IDES Prospector Already have an account? Login Here

IDES

Bayflex® XGT-4

Polyurethane (Polyether, MDI)

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Bayflex® XGT-4 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Bayflex XGT 4 is an elastomeric polyurethane system used in the reaction injection molding (RIM) process. The system is supplied as two liquid components: Component A is a modified diphenylmethane diisocyanate (MDI), and Component B is a polyether polyol system. Note: The polyol component phase-separates upon standing and must be thoroughly mixed via mechanical means prior to use.

The extended gel time of Bayflex XGT 4 gives equipment designers the flexibility to create large, complex parts that can be molded on existing injection machinery. The resin's excellent surface quality and high impact resistance make it a candidate for agricultural equipment, heavy-duty trucks, specialty transportation, and marine applications.

As with any product, use of Bayflex XGT 4 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Surface Finish
  • High Impact Resistance
 
Uses 
  • Agricultural Applications
  • Automotive Applications
  • Marine Applications
Forms 
  • Liquid
Processing Method 
  • Reaction Injection Molding (RIM)
Physical
Nominal Value
Unit
 
Specific Gravity
     
-- 2
 
 
-- 3
 
 
-- 4
 
 
Molding Shrinkage - Flow
in/in
 
Viscosity
     
77°F 2
mPa·s
 
77°F 4
mPa·s
 
Water Content
wt%
 
Mechanical
Nominal Value
Unit
 
Tensile Strength (Break)
psi
 
Tensile Elongation (Break)
%
 
Flexural Modulus
     
-22°F
psi
 
73°F
psi
 
158°F
psi
 
Elastomers
Nominal Value
Unit
 
Tear Strength
lbf/in
 
Hardness
Nominal Value
Unit
 
Durometer Hardness (Shore A)
 
 
Thermal
Nominal Value
Unit
 
CLTE - Flow
in/in/°F
 
Flammability
Nominal Value
Unit
 
Flash Point
     
-- 5
°F
 
-- 6
°F
 
Thermoset
Nominal Value
Unit
 
Thermoset Components
     
Part A
 
 
Part B
 
 
Additional Information
Nominal Value
Unit
 
NCO 4
%
 
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Bayflex® XGT-4, Bayflex XGT4, Bayflex® , Bayflex, BayflexXGT4, XGT, XGT-4, XGT4, XGT:4, XGT/4, XGT+4, XGT_4, XGT 4, Polyurethane, Polyurethane (Polyether, MDI), Polyurethane Polyether MDI, PUR-Ether/MDI, PUREtherMDI, PUR-Ether:MDI, PUR-Ether+MDI, PUR-Ether-MDI, PUR-Ether_MDI, PUR-Ether MDI, PUR:Ether/MDI, PUR/Ether/MDI, PUR+Ether/MDI, PUR_Ether/MDI, PUR Ether/MDI, PUR, Bayer, PolyurethanePolyetherMDI, PUREther_MDI, PUREther MDI, PUR_EtherMDI, PUR EtherMDI, 4XGT
Features
Features may also be described by the following terms: High Impact Resistance, Good Surface Finish.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Injection
Nominal Value
Unit
 
Mold Temperature
°F
 
Injection Notes
Chemical Temperature: 32 to 38°C
Polyol Nucleation Specific Gravity: 0.75 to 0.80
Maximum Shot Time: 8 to 10 sec
Typical Cure Time, 0.125 in: 2 to 3 min
Notes
1Typical properties: these are not to be construed as specifications.
2Component B (Polyol)
3System
4Component A (Isocyanate)
5Component B (Polyol), PMCC
6Component A (Isocyanate), PMCC
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.