IDES Prospector Already have an account? Login Here

IDES

Baytec® SPR-092A Black

Polyurethane (Polyether, MDI)

Supplied by Bayer MaterialScience LLC

The technical datasheet with complete property values for Baytec® SPR-092A Black is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Baytec SPR-092A Black is a two-component, 100%-solids thick film coating spray system with a Shore A hardness of 92*. The isocyanate component is a modified diphenylmethane diisocyanate (MDI) prepolymer, and the B component is a polyether polyol amine blend. The system has added UV stabilizers and is used in industrial applications to improve the corrosion, weather, and abrasion resistance of various surfaces. The system is pigmented black.

Typical applications include wastewater infrastructure, pipes, secondary containment, foams, and other industrial surfaces. As with any product, use of the Baytec SPR-092A Black system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • UV Stabilizer
Features 
  • Good Abrasion Resistance
  • Good Corrosion Resistance
  • Good Weather Resistance
Uses 
  • Coating Applications
  • Industrial Applications
  • Pipe Coatings
  • Protective Coatings
 
Appearance 
  • Black
Forms 
  • Liquid
Processing Method 
  • Spraying
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Water Absorption - 30 days
%
Internal Method
Mechanical
Nominal Value
Unit
Test Method
Taber Abrasion Resistance (1000 Cycles, 1.0E+6 g, H-18 Wheel)
mg
ASTM D1044
Elastomers
Nominal Value
Unit
Test Method
Tensile Strength (Break)
psi
ASTM D412
Tensile Elongation (Break)
%
ASTM D412
Tear Strength 2
lbf/in
ASTM D624
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
ASTM D2240
Thermoset
Nominal Value
Unit
Test Method
Thermoset Components
     
Part A
 
 
Part B
 
 
Shelf Life (77°F)
wk
 
Additional Information
Nominal Value
Unit
Test Method
Tear Strength, Split
lbf/in
ASTM D1938
Part A
  • Type: Isocyanate
  • Appearance: Yellowish liquid
  • Specific Gravity @ 25°C: 1.09
  • Viscosity @25°C: 2500 mPa-s
  • Flash Point PMCC: 216 °C

Part B
  • Type: Polyol
  • Appearance: Black liquid
  • Specific Gravity @ 25°C: 1.04
  • Viscosity @25°C: 1740 mPa-s
  • Flash Point PMCC: 179 °C

Molding Parameters
  • Material Temperature: 90 to 71 °C
  • Gel Time: 12 to 15 sec
  • Tack-Free Time: 60 sec
  • Handling Time: 30 min
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Baytec® SPR-092A Black, Baytec SPR092A Black, Baytec® , Baytec, BaytecSPR092ABlack, SPR, SPR 092 A Black, SPR-092A Black, SPR092A Black, SPR:092A Black, SPR/092A Black, SPR+092A Black, SPR_092A Black, SPR 092A Black, SPR092, 092A, ABlack, SPR092ABlack, Polyurethane, SPR_092ABlack, Polyurethane (Polyether, MDI), Polyurethane Polyether MDI, PUR-Ether/MDI, PUREtherMDI, PUR-Ether:MDI, PUR-Ether+MDI, PUR-Ether-MDI, PUR-Ether_MDI, PUR-Ether MDI, PUR:Ether/MDI, PUR/Ether/MDI, PUR+Ether/MDI, PUR_Ether/MDI, PUR Ether/MDI, PUR, Bayer, PolyurethanePolyetherMDI, PUREther_MDI, PUREther MDI, PUR_EtherMDI, PUR EtherMDI, 092SPR
Features
Features may also be described by the following terms: Good Abrasion Resistance, Abrasion Resistant, Good Corrosion Resistance, Corrosion Resistant, Good Weather Resistance, Weather Resistant.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating, Protective Coatings, Protective Coating.
Notes
1Typical properties: these are not to be construed as specifications.
2Die C
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.